X86FixupLEAs.cpp

Go to the documentation of this file.

//===-- X86FixupLEAs.cpp - use or replace LEA instructions -----------===//
//
// Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
// See https://llvm.org/LICENSE.txt for license information.
// SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
//
//===----------------------------------------------------------------------===//
//
// This file defines the pass that finds instructions that can be
// re-written as LEA instructions in order to reduce pipeline delays.
// It replaces LEAs with ADD/INC/DEC when that is better for size/speed.
//
//===----------------------------------------------------------------------===//
 
#include "X86.h"
#include "X86InstrInfo.h"
#include "X86Subtarget.h"
#include "llvm/ADT/Statistic.h"
#include "llvm/Analysis/ProfileSummaryInfo.h"
#include "llvm/CodeGen/LazyMachineBlockFrequencyInfo.h"
#include "llvm/CodeGen/MachineFunctionPass.h"
#include "llvm/CodeGen/MachineInstrBuilder.h"
#include "llvm/CodeGen/MachineSizeOpts.h"
#include "llvm/CodeGen/Passes.h"
#include "llvm/CodeGen/TargetSchedule.h"
#include "llvm/Support/CommandLine.h"
#include "llvm/Support/Debug.h"
#include "llvm/Support/raw_ostream.h"
using namespace llvm;
 
#define FIXUPLEA_DESC "X86 LEA Fixup"
#define FIXUPLEA_NAME "x86-fixup-leas"
 
#define DEBUG_TYPE FIXUPLEA_NAME
 
STATISTIC(NumLEAs, "Number of LEA instructions created");
 
namespace {
class FixupLEAsImpl {
  enum RegUsageState { RU_NotUsed, RU_Write, RU_Read };
 
  /// Given a machine register, look for the instruction
  /// which writes it in the current basic block. If found,
  /// try to replace it with an equivalent LEA instruction.
  /// If replacement succeeds, then also process the newly created
  /// instruction.
  void seekLEAFixup(MachineOperand &p, MachineBasicBlock::iterator &I,
                    MachineBasicBlock &MBB);
 
  /// Given a memory access or LEA instruction
  /// whose address mode uses a base and/or index register, look for
  /// an opportunity to replace the instruction which sets the base or index
  /// register with an equivalent LEA instruction.
  void processInstruction(MachineBasicBlock::iterator &I,
                          MachineBasicBlock &MBB);
 
  /// Given a LEA instruction which is unprofitable
  /// on SlowLEA targets try to replace it with an equivalent ADD instruction.
  void processInstructionForSlowLEA(MachineBasicBlock::iterator &I,
                                    MachineBasicBlock &MBB);
 
  /// Given a LEA instruction which is unprofitable
  /// on SNB+ try to replace it with other instructions.
  /// According to Intel's Optimization Reference Manual:
  /// " For LEA instructions with three source operands and some specific
  ///   situations, instruction latency has increased to 3 cycles, and must
  ///   dispatch via port 1:
  /// - LEA that has all three source operands: base, index, and offset
  /// - LEA that uses base and index registers where the base is EBP, RBP,
  ///   or R13
  /// - LEA that uses RIP relative addressing mode
  /// - LEA that uses 16-bit addressing mode "
  /// This function currently handles the first 2 cases only.
  void processInstrForSlow3OpLEA(MachineBasicBlock::iterator &I,
                                 MachineBasicBlock &MBB, bool OptIncDec);
 
  /// Look for LEAs that are really two address LEAs that we might be able to
  /// turn into regular ADD instructions.
  bool optTwoAddrLEA(MachineBasicBlock::iterator &I,
                     MachineBasicBlock &MBB, bool OptIncDec,
                     bool UseLEAForSP) const;
 
  /// Look for and transform the sequence
  ///     lea (reg1, reg2), reg3
  ///     sub reg3, reg4
  /// to
  ///     sub reg1, reg4
  ///     sub reg2, reg4
  /// It can also optimize the sequence lea/add similarly.
  bool optLEAALU(MachineBasicBlock::iterator &I, MachineBasicBlock &MBB) const;
 
  /// Step forwards in MBB, looking for an ADD/SUB instruction which uses
  /// the dest register of LEA instruction I.
  MachineBasicBlock::iterator searchALUInst(MachineBasicBlock::iterator &I,
                                            MachineBasicBlock &MBB) const;
 
  /// Check instructions between LeaI and AluI (exclusively).
  /// Set BaseIndexDef to true if base or index register from LeaI is defined.
  /// Set AluDestRef to true if the dest register of AluI is used or defined.
  /// *KilledBase is set to the killed base register usage.
  /// *KilledIndex is set to the killed index register usage.
  void checkRegUsage(MachineBasicBlock::iterator &LeaI,
                     MachineBasicBlock::iterator &AluI, bool &BaseIndexDef,
                     bool &AluDestRef, MachineOperand **KilledBase,
                     MachineOperand **KilledIndex) const;
 
  /// Determine if an instruction references a machine register
  /// and, if so, whether it reads or writes the register.
  RegUsageState usesRegister(MachineOperand &p, MachineBasicBlock::iterator I);
 
  /// Step backwards through a basic block, looking
  /// for an instruction which writes a register within
  /// a maximum of INSTR_DISTANCE_THRESHOLD instruction latency cycles.
  MachineBasicBlock::iterator searchBackwards(MachineOperand &p,
                                              MachineBasicBlock::iterator &I,
                                              MachineBasicBlock &MBB);
 
  /// if an instruction can be converted to an
  /// equivalent LEA, insert the new instruction into the basic block
  /// and return a pointer to it. Otherwise, return zero.
  MachineInstr *postRAConvertToLEA(MachineBasicBlock &MBB,
                                   MachineBasicBlock::iterator &MBBI) const;
 
public:
  FixupLEAsImpl(ProfileSummaryInfo *PSI, MachineBlockFrequencyInfo *MBFI)
      : PSI(PSI), MBFI(MBFI) {}
 
  /// Loop over all of the basic blocks,
  /// replacing instructions by equivalent LEA instructions
  /// if needed and when possible.
  bool runOnMachineFunction(MachineFunction &MF);
 
private:
  TargetSchedModel TSM;
  const X86InstrInfo *TII = nullptr;
  const X86RegisterInfo *TRI = nullptr;
  ProfileSummaryInfo *PSI;
  MachineBlockFrequencyInfo *MBFI;
};
 
class FixupLEAsLegacy : public MachineFunctionPass {
public:
  static char ID;
 
  StringRef getPassName() const override { return FIXUPLEA_DESC; }
 
  FixupLEAsLegacy() : MachineFunctionPass(ID) {}
 
  bool runOnMachineFunction(MachineFunction &MF) override;
 
  // This pass runs after regalloc and doesn't support VReg operands.
  MachineFunctionProperties getRequiredProperties() const override {
    return MachineFunctionProperties().setNoVRegs();
  }
 
  void getAnalysisUsage(AnalysisUsage &AU) const override {
    AU.addRequired<ProfileSummaryInfoWrapperPass>();
    AU.addRequired<LazyMachineBlockFrequencyInfoPass>();
    MachineFunctionPass::getAnalysisUsage(AU);
  }
};
}
 
char FixupLEAsLegacy::ID = 0;
 
INITIALIZE_PASS(FixupLEAsLegacy, FIXUPLEA_NAME, FIXUPLEA_DESC, false, false)
 
MachineInstr *
FixupLEAsImpl::postRAConvertToLEA(MachineBasicBlock &MBB,
                                  MachineBasicBlock::iterator &MBBI) const {
  MachineInstr &MI = *MBBI;
  switch (MI.getOpcode()) {
  case X86::MOV32rr:
  case X86::MOV64rr: {
    const MachineOperand &Src = MI.getOperand(1);
    const MachineOperand &Dest = MI.getOperand(0);
    MachineInstr *NewMI =
        BuildMI(MBB, MBBI, MI.getDebugLoc(),
                TII->get(MI.getOpcode() == X86::MOV32rr ? X86::LEA32r
                                                        : X86::LEA64r))
            .add(Dest)
            .add(Src)
            .addImm(1)
            .addReg(0)
            .addImm(0)
            .addReg(0);
    return NewMI;
  }
  }
 
  if (!MI.isConvertibleTo3Addr())
    return nullptr;
 
  switch (MI.getOpcode()) {
  default:
    // Only convert instructions that we've verified are safe.
    return nullptr;
  case X86::ADD64ri32:
  case X86::ADD64ri32_DB:
  case X86::ADD32ri:
  case X86::ADD32ri_DB:
    if (!MI.getOperand(2).isImm()) {
      // convertToThreeAddress will call getImm()
      // which requires isImm() to be true
      return nullptr;
    }
    break;
  case X86::SHL64ri:
  case X86::SHL32ri:
  case X86::INC64r:
  case X86::INC32r:
  case X86::DEC64r:
  case X86::DEC32r:
  case X86::ADD64rr:
  case X86::ADD64rr_DB:
  case X86::ADD32rr:
  case X86::ADD32rr_DB:
    // These instructions are all fine to convert.
    break;
  }
  return TII->convertToThreeAddress(MI, /*LIS=*/nullptr);
}
 
FunctionPass *llvm::createX86FixupLEAsLegacyPass() {
  return new FixupLEAsLegacy();
}
 
static bool isLEA(unsigned Opcode) {
  return Opcode == X86::LEA32r || Opcode == X86::LEA64r ||
         Opcode == X86::LEA64_32r;
}
 
bool FixupLEAsImpl::runOnMachineFunction(MachineFunction &MF) {
  const X86Subtarget &ST = MF.getSubtarget<X86Subtarget>();
  bool IsSlowLEA = ST.slowLEA();
  bool IsSlow3OpsLEA = ST.slow3OpsLEA();
  bool LEAUsesAG = ST.leaUsesAG();
 
  bool OptIncDec = !ST.slowIncDec() || MF.getFunction().hasOptSize();
  bool UseLEAForSP = ST.useLeaForSP();
 
  TSM.init(&ST);
  TII = ST.getInstrInfo();
  TRI = ST.getRegisterInfo();
 
  LLVM_DEBUG(dbgs() << "Start X86FixupLEAs\n";);
  for (MachineBasicBlock &MBB : MF) {
    // First pass. Try to remove or optimize existing LEAs.
    bool OptIncDecPerBB =
        OptIncDec || llvm::shouldOptimizeForSize(&MBB, PSI, MBFI);
    for (MachineBasicBlock::iterator I = MBB.begin(); I != MBB.end(); ++I) {
      if (!isLEA(I->getOpcode()))
        continue;
 
      if (optTwoAddrLEA(I, MBB, OptIncDecPerBB, UseLEAForSP))
        continue;
 
      if (IsSlowLEA)
        processInstructionForSlowLEA(I, MBB);
      else if (IsSlow3OpsLEA)
        processInstrForSlow3OpLEA(I, MBB, OptIncDecPerBB);
    }
 
    // Second pass for creating LEAs. This may reverse some of the
    // transformations above.
    if (LEAUsesAG) {
      for (MachineBasicBlock::iterator I = MBB.begin(); I != MBB.end(); ++I)
        processInstruction(I, MBB);
    }
  }
 
  LLVM_DEBUG(dbgs() << "End X86FixupLEAs\n";);
 
  return true;
}
 
FixupLEAsImpl::RegUsageState
FixupLEAsImpl::usesRegister(MachineOperand &p, MachineBasicBlock::iterator I) {
  RegUsageState RegUsage = RU_NotUsed;
  MachineInstr &MI = *I;
 
  for (const MachineOperand &MO : MI.operands()) {
    if (MO.isReg() && MO.getReg() == p.getReg()) {
      if (MO.isDef())
        return RU_Write;
      RegUsage = RU_Read;
    }
  }
  return RegUsage;
}
 
/// getPreviousInstr - Given a reference to an instruction in a basic
/// block, return a reference to the previous instruction in the block,
/// wrapping around to the last instruction of the block if the block
/// branches to itself.
static inline bool getPreviousInstr(MachineBasicBlock::iterator &I,
                                    MachineBasicBlock &MBB) {
  if (I == MBB.begin()) {
    if (MBB.isPredecessor(&MBB)) {
      I = --MBB.end();
      return true;
    } else
      return false;
  }
  --I;
  return true;
}
 
MachineBasicBlock::iterator FixupLEAsImpl::searchBackwards(
    MachineOperand &p, MachineBasicBlock::iterator &I, MachineBasicBlock &MBB) {
  int InstrDistance = 1;
  MachineBasicBlock::iterator CurInst;
  static const int INSTR_DISTANCE_THRESHOLD = 5;
 
  CurInst = I;
  bool Found;
  Found = getPreviousInstr(CurInst, MBB);
  while (Found && I != CurInst) {
    if (CurInst->isCall() || CurInst->isInlineAsm())
      break;
    if (InstrDistance > INSTR_DISTANCE_THRESHOLD)
      break; // too far back to make a difference
    if (usesRegister(p, CurInst) == RU_Write) {
      return CurInst;
    }
    InstrDistance += TSM.computeInstrLatency(&*CurInst);
    Found = getPreviousInstr(CurInst, MBB);
  }
  return MachineBasicBlock::iterator();
}
 
static inline bool isInefficientLEAReg(Register Reg) {
  return Reg == X86::EBP || Reg == X86::RBP ||
         Reg == X86::R13D || Reg == X86::R13;
}
 
/// Returns true if this LEA uses base and index registers, and the base
/// register is known to be inefficient for the subtarget.
// TODO: use a variant scheduling class to model the latency profile
// of LEA instructions, and implement this logic as a scheduling predicate.
static inline bool hasInefficientLEABaseReg(const MachineOperand &Base,
                                            const MachineOperand &Index) {
  return Base.isReg() && isInefficientLEAReg(Base.getReg()) && Index.isReg() &&
         Index.getReg().isValid();
}
 
// Returns true if this operand may have a non-zero offset.
static inline bool mayHaveOffset(const MachineOperand &Offset) {
  return !(Offset.isImm() && Offset.getImm() == 0);
}
 
static inline unsigned getADDrrFromLEA(unsigned LEAOpcode) {
  switch (LEAOpcode) {
  default:
    llvm_unreachable("Unexpected LEA instruction");
  case X86::LEA32r:
  case X86::LEA64_32r:
    return X86::ADD32rr;
  case X86::LEA64r:
    return X86::ADD64rr;
  }
}
 
static inline unsigned getSUBrrFromLEA(unsigned LEAOpcode) {
  switch (LEAOpcode) {
  default:
    llvm_unreachable("Unexpected LEA instruction");
  case X86::LEA32r:
  case X86::LEA64_32r:
    return X86::SUB32rr;
  case X86::LEA64r:
    return X86::SUB64rr;
  }
}
 
static inline unsigned getADDriFromLEA(unsigned LEAOpcode,
                                       const MachineOperand &Offset) {
  switch (LEAOpcode) {
  default:
    llvm_unreachable("Unexpected LEA instruction");
  case X86::LEA32r:
  case X86::LEA64_32r:
    return X86::ADD32ri;
  case X86::LEA64r:
    return X86::ADD64ri32;
  }
}
 
static inline unsigned getSUBriFromLEA(unsigned LEAOpcode) {
  switch (LEAOpcode) {
  default:
    llvm_unreachable("Unexpected LEA instruction");
  case X86::LEA32r:
  case X86::LEA64_32r:
    return X86::SUB32ri;
  case X86::LEA64r:
    return X86::SUB64ri32;
  }
}
 
static inline unsigned getINCDECFromLEA(unsigned LEAOpcode, bool IsINC) {
  switch (LEAOpcode) {
  default:
    llvm_unreachable("Unexpected LEA instruction");
  case X86::LEA32r:
  case X86::LEA64_32r:
    return IsINC ? X86::INC32r : X86::DEC32r;
  case X86::LEA64r:
    return IsINC ? X86::INC64r : X86::DEC64r;
  }
}
 
MachineBasicBlock::iterator
FixupLEAsImpl::searchALUInst(MachineBasicBlock::iterator &I,
                             MachineBasicBlock &MBB) const {
  const X86Subtarget &ST = MBB.getParent()->getSubtarget<X86Subtarget>();
  unsigned InstrDistance = 1;
 
  unsigned LEAOpcode = I->getOpcode();
  unsigned AddOpcode = getADDrrFromLEA(LEAOpcode);
  unsigned SubOpcode = getSUBrrFromLEA(LEAOpcode);
  Register DestReg = I->getOperand(0).getReg();
 
  for (MachineInstr &CurInst : instructionsWithoutDebug(
           std::next(I), MBB.end(), /*SkipPseudoOp=*/false)) {
    if (CurInst.isCall() || CurInst.isInlineAsm())
      break;
    if (InstrDistance > ST.getCLOpts().fixup_leas_search_distance_threshold)
      break;
 
    // Check if the lea dest register is used in an add/sub instruction only.
    for (unsigned I = 0, E = CurInst.getNumOperands(); I != E; ++I) {
      MachineOperand &Opnd = CurInst.getOperand(I);
      if (Opnd.isReg()) {
        if (Opnd.getReg() == DestReg) {
          if (Opnd.isDef() || !Opnd.isKill())
            return MachineBasicBlock::iterator();
 
          unsigned AluOpcode = CurInst.getOpcode();
          if (AluOpcode != AddOpcode && AluOpcode != SubOpcode)
            return MachineBasicBlock::iterator();
 
          MachineOperand &Opnd2 = CurInst.getOperand(3 - I);
          MachineOperand AluDest = CurInst.getOperand(0);
          if (Opnd2.getReg() != AluDest.getReg())
            return MachineBasicBlock::iterator();
 
          // X - (Y + Z) may generate different flags than (X - Y) - Z when
          // there is overflow. So we can't change the alu instruction if the
          // flags register is live.
          if (!CurInst.registerDefIsDead(X86::EFLAGS, TRI))
            return MachineBasicBlock::iterator();
 
          return CurInst.getIterator();
        }
        if (TRI->regsOverlap(DestReg, Opnd.getReg()))
          return MachineBasicBlock::iterator();
      }
    }
 
    InstrDistance++;
  }
  return MachineBasicBlock::iterator();
}
 
void FixupLEAsImpl::checkRegUsage(MachineBasicBlock::iterator &LeaI,
                                  MachineBasicBlock::iterator &AluI,
                                  bool &BaseIndexDef, bool &AluDestRef,
                                  MachineOperand **KilledBase,
                                  MachineOperand **KilledIndex) const {
  BaseIndexDef = AluDestRef = false;
  *KilledBase = *KilledIndex = nullptr;
  Register BaseReg = LeaI->getOperand(1 + X86::AddrBaseReg).getReg();
  Register IndexReg = LeaI->getOperand(1 + X86::AddrIndexReg).getReg();
  Register AluDestReg = AluI->getOperand(0).getReg();
 
  for (MachineInstr &CurInst : llvm::make_range(std::next(LeaI), AluI)) {
    for (MachineOperand &Opnd : CurInst.operands()) {
      if (!Opnd.isReg())
        continue;
      Register Reg = Opnd.getReg();
      if (TRI->regsOverlap(Reg, AluDestReg))
        AluDestRef = true;
      if (TRI->regsOverlap(Reg, BaseReg)) {
        if (Opnd.isDef())
          BaseIndexDef = true;
        else if (Opnd.isKill())
          *KilledBase = &Opnd;
      }
      if (TRI->regsOverlap(Reg, IndexReg)) {
        if (Opnd.isDef())
          BaseIndexDef = true;
        else if (Opnd.isKill())
          *KilledIndex = &Opnd;
      }
    }
  }
}
 
bool FixupLEAsImpl::optLEAALU(MachineBasicBlock::iterator &I,
                              MachineBasicBlock &MBB) const {
  // Look for an add/sub instruction which uses the result of lea.
  MachineBasicBlock::iterator AluI = searchALUInst(I, MBB);
  if (AluI == MachineBasicBlock::iterator())
    return false;
 
  // Check if there are any related register usage between lea and alu.
  bool BaseIndexDef, AluDestRef;
  MachineOperand *KilledBase, *KilledIndex;
  checkRegUsage(I, AluI, BaseIndexDef, AluDestRef, &KilledBase, &KilledIndex);
 
  MachineBasicBlock::iterator InsertPos = AluI;
  if (BaseIndexDef) {
    if (AluDestRef)
      return false;
    InsertPos = I;
    KilledBase = KilledIndex = nullptr;
  }
 
  // Check if there are same registers.
  Register AluDestReg = AluI->getOperand(0).getReg();
  Register BaseReg = I->getOperand(1 + X86::AddrBaseReg).getReg();
  Register IndexReg = I->getOperand(1 + X86::AddrIndexReg).getReg();
  if (I->getOpcode() == X86::LEA64_32r) {
    BaseReg = TRI->getSubReg(BaseReg, X86::sub_32bit);
    IndexReg = TRI->getSubReg(IndexReg, X86::sub_32bit);
  }
  if (AluDestReg == IndexReg) {
    if (BaseReg == IndexReg)
      return false;
    std::swap(BaseReg, IndexReg);
    std::swap(KilledBase, KilledIndex);
  }
  if (BaseReg == IndexReg)
    KilledBase = nullptr;
 
  // Now it's safe to change instructions.
  MachineInstr *NewMI1, *NewMI2;
  unsigned NewOpcode = AluI->getOpcode();
  NewMI1 = BuildMI(MBB, InsertPos, AluI->getDebugLoc(), TII->get(NewOpcode),
                   AluDestReg)
               .addReg(AluDestReg, RegState::Kill)
               .addReg(BaseReg, getKillRegState(KilledBase));
  NewMI1->addRegisterDead(X86::EFLAGS, TRI);
  NewMI2 = BuildMI(MBB, InsertPos, AluI->getDebugLoc(), TII->get(NewOpcode),
                   AluDestReg)
               .addReg(AluDestReg, RegState::Kill)
               .addReg(IndexReg, getKillRegState(KilledIndex));
  NewMI2->addRegisterDead(X86::EFLAGS, TRI);
 
  // Clear the old Kill flags.
  if (KilledBase)
    KilledBase->setIsKill(false);
  if (KilledIndex)
    KilledIndex->setIsKill(false);
 
  MBB.getParent()->substituteDebugValuesForInst(*AluI, *NewMI2, 1);
  MBB.erase(I);
  MBB.erase(AluI);
  I = NewMI1;
  return true;
}
 
bool FixupLEAsImpl::optTwoAddrLEA(MachineBasicBlock::iterator &I,
                                  MachineBasicBlock &MBB, bool OptIncDec,
                                  bool UseLEAForSP) const {
  MachineInstr &MI = *I;
 
  const MachineOperand &Base =    MI.getOperand(1 + X86::AddrBaseReg);
  const MachineOperand &Scale =   MI.getOperand(1 + X86::AddrScaleAmt);
  const MachineOperand &Index =   MI.getOperand(1 + X86::AddrIndexReg);
  const MachineOperand &Disp =    MI.getOperand(1 + X86::AddrDisp);
  const MachineOperand &Segment = MI.getOperand(1 + X86::AddrSegmentReg);
 
  if (Segment.getReg().isValid() || !Disp.isImm() || Scale.getImm() > 1 ||
      MBB.computeRegisterLiveness(TRI, X86::EFLAGS, I) !=
          MachineBasicBlock::LQR_Dead)
    return false;
 
  Register DestReg = MI.getOperand(0).getReg();
  Register BaseReg = Base.getReg();
  Register IndexReg = Index.getReg();
 
  // Don't change stack adjustment LEAs.
  if (UseLEAForSP && (DestReg == X86::ESP || DestReg == X86::RSP))
    return false;
 
  // LEA64_32 has 64-bit operands but 32-bit result.
  if (MI.getOpcode() == X86::LEA64_32r) {
    if (BaseReg)
      BaseReg = TRI->getSubReg(BaseReg, X86::sub_32bit);
    if (IndexReg)
      IndexReg = TRI->getSubReg(IndexReg, X86::sub_32bit);
  }
 
  MachineInstr *NewMI = nullptr;
 
  // Case 1.
  // Look for lea(%reg1, %reg2), %reg1 or lea(%reg2, %reg1), %reg1
  // which can be turned into add %reg2, %reg1
  if (BaseReg.isValid() && IndexReg.isValid() && Disp.getImm() == 0 &&
      (DestReg == BaseReg || DestReg == IndexReg)) {
    unsigned NewOpcode = getADDrrFromLEA(MI.getOpcode());
    if (DestReg != BaseReg)
      std::swap(BaseReg, IndexReg);
 
    if (MI.getOpcode() == X86::LEA64_32r) {
      // TODO: Do we need the super register implicit use?
      NewMI = BuildMI(MBB, I, MI.getDebugLoc(), TII->get(NewOpcode), DestReg)
        .addReg(BaseReg).addReg(IndexReg)
        .addReg(Base.getReg(), RegState::Implicit)
        .addReg(Index.getReg(), RegState::Implicit);
    } else {
      NewMI = BuildMI(MBB, I, MI.getDebugLoc(), TII->get(NewOpcode), DestReg)
        .addReg(BaseReg).addReg(IndexReg);
    }
  } else if (DestReg == BaseReg && !IndexReg) {
    // Case 2.
    // This is an LEA with only a base register and a displacement,
    // We can use ADDri or INC/DEC.
 
    // Does this LEA have one these forms:
    // lea  %reg, 1(%reg)
    // lea  %reg, -1(%reg)
    if (OptIncDec && (Disp.getImm() == 1 || Disp.getImm() == -1)) {
      bool IsINC = Disp.getImm() == 1;
      unsigned NewOpcode = getINCDECFromLEA(MI.getOpcode(), IsINC);
 
      if (MI.getOpcode() == X86::LEA64_32r) {
        // TODO: Do we need the super register implicit use?
        NewMI = BuildMI(MBB, I, MI.getDebugLoc(), TII->get(NewOpcode), DestReg)
          .addReg(BaseReg).addReg(Base.getReg(), RegState::Implicit);
      } else {
        NewMI = BuildMI(MBB, I, MI.getDebugLoc(), TII->get(NewOpcode), DestReg)
          .addReg(BaseReg);
      }
    } else {
      unsigned NewOpcode = getADDriFromLEA(MI.getOpcode(), Disp);
      if (MI.getOpcode() == X86::LEA64_32r) {
        // TODO: Do we need the super register implicit use?
        NewMI = BuildMI(MBB, I, MI.getDebugLoc(), TII->get(NewOpcode), DestReg)
          .addReg(BaseReg).addImm(Disp.getImm())
          .addReg(Base.getReg(), RegState::Implicit);
      } else {
        NewMI = BuildMI(MBB, I, MI.getDebugLoc(), TII->get(NewOpcode), DestReg)
          .addReg(BaseReg).addImm(Disp.getImm());
      }
    }
  } else if (BaseReg.isValid() && IndexReg.isValid() && Disp.getImm() == 0) {
    // Case 3.
    // Look for and transform the sequence
    //     lea (reg1, reg2), reg3
    //     sub reg3, reg4
    return optLEAALU(I, MBB);
  } else
    return false;
 
  MBB.getParent()->substituteDebugValuesForInst(*I, *NewMI, 1);
  MBB.erase(I);
  I = NewMI;
  return true;
}
 
void FixupLEAsImpl::processInstruction(MachineBasicBlock::iterator &I,
                                       MachineBasicBlock &MBB) {
  // Process a load, store, or LEA instruction.
  MachineInstr &MI = *I;
  int AddrOffset = X86II::getMemoryOperandIdx(MI.getDesc());
  if (AddrOffset >= 0) {
    MachineOperand &p = MI.getOperand(AddrOffset + X86::AddrBaseReg);
    if (p.isReg() && p.getReg() != X86::ESP) {
      seekLEAFixup(p, I, MBB);
    }
    MachineOperand &q = MI.getOperand(AddrOffset + X86::AddrIndexReg);
    if (q.isReg() && q.getReg() != X86::ESP) {
      seekLEAFixup(q, I, MBB);
    }
  }
}
 
void FixupLEAsImpl::seekLEAFixup(MachineOperand &p,
                                 MachineBasicBlock::iterator &I,
                                 MachineBasicBlock &MBB) {
  MachineBasicBlock::iterator MBI = searchBackwards(p, I, MBB);
  if (MBI != MachineBasicBlock::iterator()) {
    MachineInstr *NewMI = postRAConvertToLEA(MBB, MBI);
    if (NewMI) {
      ++NumLEAs;
      LLVM_DEBUG(dbgs() << "FixLEA: Candidate to replace:"; MBI->dump(););
      // now to replace with an equivalent LEA...
      LLVM_DEBUG(dbgs() << "FixLEA: Replaced by: "; NewMI->dump(););
      MBB.getParent()->substituteDebugValuesForInst(*MBI, *NewMI, 1);
      MBB.erase(MBI);
      MachineBasicBlock::iterator J =
          static_cast<MachineBasicBlock::iterator>(NewMI);
      processInstruction(J, MBB);
    }
  }
}
 
void FixupLEAsImpl::processInstructionForSlowLEA(MachineBasicBlock::iterator &I,
                                                 MachineBasicBlock &MBB) {
  MachineInstr &MI = *I;
  const unsigned Opcode = MI.getOpcode();
 
  const MachineOperand &Dst =     MI.getOperand(0);
  const MachineOperand &Base =    MI.getOperand(1 + X86::AddrBaseReg);
  const MachineOperand &Scale =   MI.getOperand(1 + X86::AddrScaleAmt);
  const MachineOperand &Index =   MI.getOperand(1 + X86::AddrIndexReg);
  const MachineOperand &Offset =  MI.getOperand(1 + X86::AddrDisp);
  const MachineOperand &Segment = MI.getOperand(1 + X86::AddrSegmentReg);
 
  if (Segment.getReg().isValid() || !Offset.isImm() ||
      MBB.computeRegisterLiveness(TRI, X86::EFLAGS, I, 4) !=
          MachineBasicBlock::LQR_Dead)
    return;
  const Register DstR = Dst.getReg();
  const Register SrcR1 = Base.getReg();
  const Register SrcR2 = Index.getReg();
  if ((!SrcR1 || SrcR1 != DstR) && (!SrcR2 || SrcR2 != DstR))
    return;
  if (Scale.getImm() > 1)
    return;
  LLVM_DEBUG(dbgs() << "FixLEA: Candidate to replace:"; I->dump(););
  LLVM_DEBUG(dbgs() << "FixLEA: Replaced by: ";);
  MachineInstr *NewMI = nullptr;
  // Make ADD instruction for two registers writing to LEA's destination
  if (SrcR1 && SrcR2) {
    const MCInstrDesc &ADDrr = TII->get(getADDrrFromLEA(Opcode));
    const MachineOperand &Src = SrcR1 == DstR ? Index : Base;
    NewMI =
        BuildMI(MBB, I, MI.getDebugLoc(), ADDrr, DstR).addReg(DstR).add(Src);
    LLVM_DEBUG(NewMI->dump(););
  }
  // Make ADD instruction for immediate
  if (Offset.getImm() != 0) {
    const MCInstrDesc &ADDri =
        TII->get(getADDriFromLEA(Opcode, Offset));
    const MachineOperand &SrcR = SrcR1 == DstR ? Base : Index;
    NewMI = BuildMI(MBB, I, MI.getDebugLoc(), ADDri, DstR)
                .add(SrcR)
                .addImm(Offset.getImm());
    LLVM_DEBUG(NewMI->dump(););
  }
  if (NewMI) {
    MBB.getParent()->substituteDebugValuesForInst(*I, *NewMI, 1);
    MBB.erase(I);
    I = NewMI;
  }
}
 
void FixupLEAsImpl::processInstrForSlow3OpLEA(MachineBasicBlock::iterator &I,
                                              MachineBasicBlock &MBB,
                                              bool OptIncDec) {
  MachineInstr &MI = *I;
  const unsigned LEAOpcode = MI.getOpcode();
 
  const MachineOperand &Dest =    MI.getOperand(0);
  const MachineOperand &Base =    MI.getOperand(1 + X86::AddrBaseReg);
  const MachineOperand &Scale =   MI.getOperand(1 + X86::AddrScaleAmt);
  const MachineOperand &Index =   MI.getOperand(1 + X86::AddrIndexReg);
  const MachineOperand &Offset =  MI.getOperand(1 + X86::AddrDisp);
  const MachineOperand &Segment = MI.getOperand(1 + X86::AddrSegmentReg);
 
  if (!(TII->isThreeOperandsLEA(MI) || hasInefficientLEABaseReg(Base, Index)) ||
      MBB.computeRegisterLiveness(TRI, X86::EFLAGS, I, 4) !=
          MachineBasicBlock::LQR_Dead ||
      Segment.getReg().isValid())
    return;
 
  Register DestReg = Dest.getReg();
  Register BaseReg = Base.getReg();
  Register IndexReg = Index.getReg();
 
  if (MI.getOpcode() == X86::LEA64_32r) {
    if (BaseReg)
      BaseReg = TRI->getSubReg(BaseReg, X86::sub_32bit);
    if (IndexReg)
      IndexReg = TRI->getSubReg(IndexReg, X86::sub_32bit);
  }
 
  bool IsScale1 = Scale.getImm() == 1;
  bool IsInefficientBase = isInefficientLEAReg(BaseReg);
  bool IsInefficientIndex = isInefficientLEAReg(IndexReg);
 
  // Skip these cases since it takes more than 2 instructions
  // to replace the LEA instruction.
  if (IsInefficientBase && DestReg == BaseReg && !IsScale1)
    return;
 
  LLVM_DEBUG(dbgs() << "FixLEA: Candidate to replace:"; MI.dump(););
  LLVM_DEBUG(dbgs() << "FixLEA: Replaced by: ";);
 
  MachineInstr *NewMI = nullptr;
  bool BaseOrIndexIsDst = DestReg == BaseReg || DestReg == IndexReg;
  // First try and remove the base while sticking with LEA iff base == index and
  // scale == 1. We can handle:
  //    1. lea D(%base,%index,1)   -> lea D(,%index,2)
  //    2. lea D(%r13/%rbp,%index) -> lea D(,%index,2)
  // Only do this if the LEA would otherwise be split into 2-instruction
  // (either it has a an Offset or neither base nor index are dst)
  if (IsScale1 && BaseReg == IndexReg &&
      (mayHaveOffset(Offset) || (IsInefficientBase && !BaseOrIndexIsDst))) {
    NewMI = BuildMI(MBB, MI, MI.getDebugLoc(), TII->get(LEAOpcode))
                .add(Dest)
                .addReg(0)
                .addImm(2)
                .add(Index)
                .add(Offset)
                .add(Segment);
    LLVM_DEBUG(NewMI->dump(););
 
    MBB.getParent()->substituteDebugValuesForInst(*I, *NewMI, 1);
    MBB.erase(I);
    I = NewMI;
    return;
  } else if (IsScale1 && BaseOrIndexIsDst) {
    // Try to replace LEA with one or two (for the 3-op LEA case)
    // add instructions:
    // 1.lea (%base,%index,1), %base => add %index,%base
    // 2.lea (%base,%index,1), %index => add %base,%index
 
    unsigned NewOpc = getADDrrFromLEA(MI.getOpcode());
    if (DestReg != BaseReg)
      std::swap(BaseReg, IndexReg);
 
    if (MI.getOpcode() == X86::LEA64_32r) {
      // TODO: Do we need the super register implicit use?
      NewMI = BuildMI(MBB, I, MI.getDebugLoc(), TII->get(NewOpc), DestReg)
                  .addReg(BaseReg)
                  .addReg(IndexReg)
                  .addReg(Base.getReg(), RegState::Implicit)
                  .addReg(Index.getReg(), RegState::Implicit);
    } else {
      NewMI = BuildMI(MBB, I, MI.getDebugLoc(), TII->get(NewOpc), DestReg)
                  .addReg(BaseReg)
                  .addReg(IndexReg);
    }
  } else if (!IsInefficientBase || (!IsInefficientIndex && IsScale1)) {
    // If the base is inefficient try switching the index and base operands,
    // otherwise just break the 3-Ops LEA inst into 2-Ops LEA + ADD instruction:
    // lea offset(%base,%index,scale),%dst =>
    // lea (%base,%index,scale); add offset,%dst
    NewMI = BuildMI(MBB, MI, MI.getDebugLoc(), TII->get(LEAOpcode))
                .add(Dest)
                .add(IsInefficientBase ? Index : Base)
                .add(Scale)
                .add(IsInefficientBase ? Base : Index)
                .addImm(0)
                .add(Segment);
    LLVM_DEBUG(NewMI->dump(););
  }
 
  // If either replacement succeeded above, add the offset if needed, then
  // replace the instruction.
  if (NewMI) {
    // Create ADD instruction for the Offset in case of 3-Ops LEA.
    if (mayHaveOffset(Offset)) {
      if (OptIncDec && Offset.isImm() &&
          (Offset.getImm() == 1 || Offset.getImm() == -1)) {
        unsigned NewOpc =
            getINCDECFromLEA(MI.getOpcode(), Offset.getImm() == 1);
        NewMI = BuildMI(MBB, I, MI.getDebugLoc(), TII->get(NewOpc), DestReg)
                    .addReg(DestReg);
        LLVM_DEBUG(NewMI->dump(););
      } else if (Offset.isImm() && Offset.getImm() == 128) {
        // ADD of +128 needs a 32-bit immediate, while SUB of -128 fits the
        // sign-extended 8-bit form, three bytes shorter. EFLAGS was proved
        // dead above, so the different flag results don't matter.
        unsigned NewOpc = getSUBriFromLEA(MI.getOpcode());
        NewMI = BuildMI(MBB, I, MI.getDebugLoc(), TII->get(NewOpc), DestReg)
                    .addReg(DestReg)
                    .addImm(-128);
        LLVM_DEBUG(NewMI->dump(););
      } else {
        unsigned NewOpc = getADDriFromLEA(MI.getOpcode(), Offset);
        NewMI = BuildMI(MBB, I, MI.getDebugLoc(), TII->get(NewOpc), DestReg)
                    .addReg(DestReg)
                    .add(Offset);
        LLVM_DEBUG(NewMI->dump(););
      }
    }
 
    MBB.getParent()->substituteDebugValuesForInst(*I, *NewMI, 1);
    MBB.erase(I);
    I = NewMI;
    return;
  }
 
  // Handle the rest of the cases with inefficient base register:
  assert(DestReg != BaseReg && "DestReg == BaseReg should be handled already!");
  assert(IsInefficientBase && "efficient base should be handled already!");
 
  // FIXME: Handle LEA64_32r.
  if (LEAOpcode == X86::LEA64_32r)
    return;
 
  // lea (%base,%index,1), %dst => mov %base,%dst; add %index,%dst
  if (IsScale1 && !mayHaveOffset(Offset)) {
    bool BIK = Base.isKill() && BaseReg != IndexReg;
    TII->copyPhysReg(MBB, MI, MI.getDebugLoc(), DestReg, BaseReg, BIK);
    LLVM_DEBUG(MI.getPrevNode()->dump(););
 
    unsigned NewOpc = getADDrrFromLEA(MI.getOpcode());
    NewMI = BuildMI(MBB, MI, MI.getDebugLoc(), TII->get(NewOpc), DestReg)
                .addReg(DestReg)
                .add(Index);
    LLVM_DEBUG(NewMI->dump(););
 
    MBB.getParent()->substituteDebugValuesForInst(*I, *NewMI, 1);
    MBB.erase(I);
    I = NewMI;
    return;
  }
 
  // lea offset(%base,%index,scale), %dst =>
  // lea offset( ,%index,scale), %dst; add %base,%dst
  NewMI = BuildMI(MBB, MI, MI.getDebugLoc(), TII->get(LEAOpcode))
              .add(Dest)
              .addReg(0)
              .add(Scale)
              .add(Index)
              .add(Offset)
              .add(Segment);
  LLVM_DEBUG(NewMI->dump(););
 
  unsigned NewOpc = getADDrrFromLEA(MI.getOpcode());
  NewMI = BuildMI(MBB, MI, MI.getDebugLoc(), TII->get(NewOpc), DestReg)
              .addReg(DestReg)
              .add(Base);
  LLVM_DEBUG(NewMI->dump(););
 
  MBB.getParent()->substituteDebugValuesForInst(*I, *NewMI, 1);
  MBB.erase(I);
  I = NewMI;
}
 
bool FixupLEAsLegacy::runOnMachineFunction(MachineFunction &MF) {
  if (skipFunction(MF.getFunction()))
    return false;
 
  auto *PSI = &getAnalysis<ProfileSummaryInfoWrapperPass>().getPSI();
  auto *MBFI = (PSI && PSI->hasProfileSummary())
                   ? &getAnalysis<LazyMachineBlockFrequencyInfoPass>().getBFI()
                   : nullptr;
  FixupLEAsImpl PassImpl(PSI, MBFI);
  return PassImpl.runOnMachineFunction(MF);
}
 
PreservedAnalyses X86FixupLEAsPass::run(MachineFunction &MF,
                                        MachineFunctionAnalysisManager &MFAM) {
  ProfileSummaryInfo *PSI =
      MFAM.getResult<ModuleAnalysisManagerMachineFunctionProxy>(MF)
          .getCachedResult<ProfileSummaryAnalysis>(
              *MF.getFunction().getParent());
  if (!PSI)
    report_fatal_error("x86-fixup-leas requires ProfileSummaryAnalysis", false);
  MachineBlockFrequencyInfo *MBFI =
      &MFAM.getResult<MachineBlockFrequencyAnalysis>(MF);
 
  FixupLEAsImpl PassImpl(PSI, MBFI);
  bool Changed = PassImpl.runOnMachineFunction(MF);
  if (!Changed)
    return PreservedAnalyses::all();
  PreservedAnalyses PA = getMachineFunctionPassPreservedAnalyses();
  PA.preserveSet<CFGAnalyses>();
  return PA;
}