LoopVectorizationLegality.cpp

Go to the documentation of this file.

//===- LoopVectorizationLegality.cpp --------------------------------------===//
//
// Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
// See https://llvm.org/LICENSE.txt for license information.
// SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
//
//===----------------------------------------------------------------------===//
//
// This file provides loop vectorization legality analysis. Original code
// resided in LoopVectorize.cpp for a long time.
//
// At this point, it is implemented as a utility class, not as an analysis
// pass. It should be easy to create an analysis pass around it if there
// is a need (but D45420 needs to happen first).
//
 
#include "llvm/Transforms/Vectorize/LoopVectorizationLegality.h"
#include "LoopVectorizationPlanner.h"
#include "VectorizeOptions.h"
#include "llvm/Analysis/AliasAnalysis.h"
#include "llvm/Analysis/Loads.h"
#include "llvm/Analysis/LoopInfo.h"
#include "llvm/Analysis/MustExecute.h"
#include "llvm/Analysis/OptimizationRemarkEmitter.h"
#include "llvm/Analysis/ScalarEvolutionExpressions.h"
#include "llvm/Analysis/ScalarEvolutionPatternMatch.h"
#include "llvm/Analysis/TargetLibraryInfo.h"
#include "llvm/Analysis/TargetTransformInfo.h"
#include "llvm/Analysis/ValueTracking.h"
#include "llvm/Analysis/VectorUtils.h"
#include "llvm/IR/Dominators.h"
#include "llvm/IR/IntrinsicInst.h"
#include "llvm/IR/PatternMatch.h"
#include "llvm/Transforms/Utils/SizeOpts.h"
#include "llvm/Transforms/Vectorize/LoopVectorize.h"
 
using namespace llvm;
using namespace PatternMatch;
using namespace LoopVectorizationUtils;
 
#define LV_NAME "loop-vectorize"
#define DEBUG_TYPE LV_NAME
 
/// Maximum vectorization interleave count.
static const unsigned MaxInterleaveFactor = 16;
 
namespace llvm {
 
bool LoopVectorizeHints::Hint::validate(unsigned Val) {
  switch (Kind) {
  case HK_WIDTH:
    return isPowerOf2_32(Val) && Val <= VectorizerParams::MaxVectorWidth;
  case HK_INTERLEAVE:
    return isPowerOf2_32(Val) && Val <= MaxInterleaveFactor;
  case HK_ISVECTORIZED:
    return (Val == 0 || Val == 1);
  }
  return false;
}
 
LoopVectorizeHints::LoopVectorizeHints(const VectorizeOptions &Opts,
                                       const Loop *L,
                                       bool InterleaveOnlyWhenForced,
                                       OptimizationRemarkEmitter &ORE,
                                       const TargetTransformInfo *TTI)
    : Opts(Opts),
      Width("vectorize.width",
            VectorizerParams::VectorizationFactor.getKnownMinValue(), HK_WIDTH),
      Interleave("interleave.count", InterleaveOnlyWhenForced, HK_INTERLEAVE),
      Force(FK_Undefined), IsVectorized("isvectorized", 0, HK_ISVECTORIZED),
      Predicate(FK_Undefined), Scalable(SK_Unspecified), TheLoop(L), ORE(ORE) {
  // Populate values with existing loop metadata.
  getHintsFromMetadata();
 
  // force-vector-interleave overrides DisableInterleaving.
  if (VectorizerParams::isInterleaveForced())
    Interleave.Value = VectorizerParams::VectorizationInterleave;
 
  // Decide whether to enable scalable vectorization.
  auto ComputeScalable =
      [TTI](ScalableForceKind ForceScalableHint,
            ScalableForceKind ForceScalableOpt, unsigned ForceWidth,
            ElementCount ForceWidthOpt) -> ScalableForceKind {
    // Loop hints have the highest precedence.
    assert(ForceScalableHint != SK_AlwaysScalable && "Unexpected loop hint.");
    if (ForceScalableHint == SK_PreferScalable ||
        ForceScalableHint == SK_FixedWidthOnly)
      return ForceScalableHint;
 
    // Then, consider -scalable-vectorization=(always|off|on).
    if (ForceScalableOpt != SK_Unspecified)
      return ForceScalableOpt;
 
    // Then, infer scalability from a preferred VF.
    if (ForceWidthOpt.isScalable())
      return SK_AlwaysScalable;
    if (ForceWidth)
      return SK_FixedWidthOnly;
 
    // Finally, listen to TTI.
    if (TTI && TTI->enableScalableVectorization())
      return SK_PreferScalable;
 
    // Preference unspecified, fallback to fixed-length vectorization.
    return SK_FixedWidthOnly;
  };
  Scalable =
      ComputeScalable(ScalableForceKind(Scalable), Opts.scalable_vectorization,
                      Width.Value, VectorizerParams::VectorizationFactor);
 
  if (IsVectorized.Value != 1)
    // If the vectorization width and interleaving count are both 1 then
    // consider the loop to have been already vectorized because there's
    // nothing more that we can do.
    IsVectorized.Value =
        getWidth() == ElementCount::getFixed(1) && getInterleave() == 1;
  LLVM_DEBUG(if (InterleaveOnlyWhenForced && getInterleave() == 1) dbgs()
             << "LV: Interleaving disabled by the pass manager\n");
}
 
void LoopVectorizeHints::setAlreadyVectorized() {
  TheLoop->addIntLoopAttribute("llvm.loop.isvectorized", 1,
                               {Twine(Prefix(), "vectorize.").str(),
                                Twine(Prefix(), "interleave.").str()});
 
  // Update internal cache.
  IsVectorized.Value = 1;
}
 
void LoopVectorizeHints::reportDisallowedVectorization(
    const StringRef DebugMsg, const StringRef RemarkName,
    const StringRef RemarkMsg, const Loop *L) const {
  LLVM_DEBUG(dbgs() << "LV: Not vectorizing: " << DebugMsg << ".\n");
  ORE.emit(OptimizationRemarkMissed(LV_NAME, RemarkName, L->getStartLoc(),
                                    L->getHeader())
           << "loop not vectorized: " << RemarkMsg);
}
 
bool LoopVectorizeHints::allowVectorization(
    Loop *L, bool VectorizeOnlyWhenForced) const {
  if (getForce() == LoopVectorizeHints::FK_Disabled) {
    if (Force == LoopVectorizeHints::FK_Disabled) {
      reportDisallowedVectorization("#pragma vectorize disable",
                                    "MissedExplicitlyDisabled",
                                    "vectorization is explicitly disabled", L);
    } else if (hasDisableAllTransformsHint(L)) {
      reportDisallowedVectorization("loop hasDisableAllTransformsHint",
                                    "MissedTransformsDisabled",
                                    "loop transformations are disabled", L);
    } else {
      llvm_unreachable("loop vect disabled for an unknown reason");
    }
    return false;
  }
 
  if (VectorizeOnlyWhenForced && getForce() != LoopVectorizeHints::FK_Enabled) {
    reportDisallowedVectorization(
        "VectorizeOnlyWhenForced is set, and no #pragma vectorize enable",
        "MissedForceOnly", "only vectorizing loops that explicitly request it",
        L);
    return false;
  }
 
  if (getIsVectorized() == 1) {
    LLVM_DEBUG(dbgs() << "LV: Not vectorizing: Disabled/already vectorized.\n");
    // FIXME: Add interleave.disable metadata. This will allow
    // vectorize.disable to be used without disabling the pass and errors
    // to differentiate between disabled vectorization and a width of 1.
    ORE.emit([&]() {
      return OptimizationRemarkAnalysis(LV_NAME, "AllDisabled",
                                        L->getStartLoc(), L->getHeader())
             << "loop not vectorized: vectorization and interleaving are "
                "explicitly disabled, or the loop has already been "
                "vectorized";
    });
    return false;
  }
 
  return true;
}
 
void LoopVectorizeHints::emitRemarkWithHints() const {
  using namespace ore;
 
  ORE.emit([&]() {
    if (Force == LoopVectorizeHints::FK_Disabled)
      return OptimizationRemarkMissed(LV_NAME, "MissedExplicitlyDisabled",
                                      TheLoop->getStartLoc(),
                                      TheLoop->getHeader())
             << "loop not vectorized: vectorization is explicitly disabled";
 
    OptimizationRemarkMissed R(LV_NAME, "MissedDetails", TheLoop->getStartLoc(),
                               TheLoop->getHeader());
    R << "loop not vectorized";
    if (Force == LoopVectorizeHints::FK_Enabled) {
      R << " (Force=" << NV("Force", true);
      if (Width.Value != 0)
        R << ", Vector Width=" << NV("VectorWidth", getWidth());
      if (getInterleave() != 0)
        R << ", Interleave Count=" << NV("InterleaveCount", getInterleave());
      R << ")";
    }
    return R;
  });
}
 
bool LoopVectorizeHints::allowReordering() const {
  // Allow the vectorizer to change the order of operations if enabling
  // loop hints are provided
  ElementCount EC = getWidth();
  return Opts.hints_allow_reordering &&
         (getForce() == LoopVectorizeHints::FK_Enabled ||
          EC.getKnownMinValue() > 1);
}
 
void LoopVectorizeHints::getHintsFromMetadata() {
  MDNode *LoopID = TheLoop->getLoopID();
  if (!LoopID)
    return;
 
  // First operand should refer to the loop id itself.
  assert(LoopID->getNumOperands() > 0 && "requires at least one operand");
  assert(LoopID->getOperand(0) == LoopID && "invalid loop id");
 
  for (const MDOperand &MDO : llvm::drop_begin(LoopID->operands())) {
    const MDString *S = nullptr;
    SmallVector<Metadata *, 4> Args;
 
    // The expected hint is either a MDString or a MDNode with the first
    // operand a MDString.
    if (const MDNode *MD = dyn_cast<MDNode>(MDO)) {
      if (!MD || MD->getNumOperands() == 0)
        continue;
      S = dyn_cast<MDString>(MD->getOperand(0));
      for (unsigned Idx = 1; Idx < MD->getNumOperands(); ++Idx)
        Args.push_back(MD->getOperand(Idx));
    } else {
      S = dyn_cast<MDString>(MDO);
      assert(Args.size() == 0 && "too many arguments for MDString");
    }
 
    if (!S)
      continue;
 
    // Check if the hint starts with the loop metadata prefix.
    StringRef Name = S->getString();
    // The single-operand enable/disable pair carries no argument.
    if (Args.empty()) {
      if (Name == "llvm.loop.vectorize.enable")
        Force = FK_Enabled;
      else if (Name == "llvm.loop.vectorize.disable")
        Force = FK_Disabled;
      else if (Name == "llvm.loop.vectorize.predicate.enable")
        Predicate = FK_Enabled;
      else if (Name == "llvm.loop.vectorize.predicate.disable")
        Predicate = FK_Disabled;
      else if (Name == "llvm.loop.vectorize.scalable.enable")
        Scalable = SK_PreferScalable;
      else if (Name == "llvm.loop.vectorize.scalable.disable")
        Scalable = SK_FixedWidthOnly;
      continue;
    }
    if (Args.size() == 1)
      setHint(Name, Args[0]);
  }
}
 
void LoopVectorizeHints::setHint(StringRef Name, Metadata *Arg) {
  if (!Name.consume_front(Prefix()))
    return;
 
  const ConstantInt *C = mdconst::dyn_extract<ConstantInt>(Arg);
  if (!C)
    return;
  unsigned Val = C->getZExtValue();
 
  // Force, Predicate, and Scalable are omitted: they are only spelled as
  // single-operand enable/disable nodes, which never reach setHint().
  Hint *Hints[] = {&Width, &Interleave, &IsVectorized};
  for (auto *H : Hints) {
    if (Name == H->Name) {
      if (H->validate(Val))
        H->Value = Val;
      else
        LLVM_DEBUG(dbgs() << "LV: ignoring invalid hint '" << Name << "'\n");
      break;
    }
  }
}
 
static IntegerType *getInductionIntegerTy(const DataLayout &DL, Type *Ty) {
  assert(Ty->isIntOrPtrTy() && "Expected integer or pointer type");
 
  if (Ty->isPointerTy())
    return DL.getIntPtrType(Ty->getContext(), Ty->getPointerAddressSpace());
 
  // It is possible that char's or short's overflow when we ask for the loop's
  // trip count, work around this by changing the type size.
  if (Ty->getScalarSizeInBits() < 32)
    return Type::getInt32Ty(Ty->getContext());
 
  return cast<IntegerType>(Ty);
}
 
static IntegerType *getWiderInductionTy(const DataLayout &DL, Type *Ty0,
                                        Type *Ty1) {
  IntegerType *TyA = getInductionIntegerTy(DL, Ty0);
  IntegerType *TyB = getInductionIntegerTy(DL, Ty1);
  return TyA->getScalarSizeInBits() > TyB->getScalarSizeInBits() ? TyA : TyB;
}
 
/// Returns true if A and B have same pointer operands or same SCEVs addresses
static bool storeToSameAddress(ScalarEvolution *SE, StoreInst *A,
                               StoreInst *B) {
  // Compare store
  if (A == B)
    return true;
 
  // Otherwise Compare pointers
  Value *APtr = A->getPointerOperand();
  Value *BPtr = B->getPointerOperand();
  if (APtr == BPtr)
    return true;
 
  // Otherwise compare address SCEVs
  return SE->getSCEV(APtr) == SE->getSCEV(BPtr);
}
 
void LoopVectorizationLegality::collectUnitStridePredicates() const {
  if (!AllowRuntimeSCEVChecks || !TheLoop->isInnermost())
    return;
 
  for (BasicBlock *BB : TheLoop->blocks())
    for (Instruction &I : *BB)
      if (Value *Ptr = getLoadStorePointerOperand(&I))
        isConsecutivePtr(getLoadStoreType(&I), Ptr);
}
 
int LoopVectorizationLegality::isConsecutivePtr(Type *AccessTy,
                                                Value *Ptr) const {
  // FIXME: Currently, the set of symbolic strides is sometimes queried before
  // it's collected.  This happens from canVectorizeWithIfConvert, when the
  // pointer is checked to reference consecutive elements suitable for a
  // masked access.
  // Stride versioning requires adding a SCEV equality predicate; only consult
  // the symbolic strides when runtime SCEV checks are permitted.
  const auto &Strides = LAI && AllowRuntimeSCEVChecks
                            ? LAI->getSymbolicStrides()
                            : SymbolicStrideMap();
  SmallVector<const SCEVPredicate *> Predicates;
  int Stride = getPtrStride(PSE, AccessTy, Ptr, TheLoop, *DT, Strides, false,
                            AllowRuntimeSCEVChecks ? &Predicates : nullptr)
                   .value_or(0);
  if (Stride != 1 && Stride != -1)
    return 0;
  PSE.addPredicates(Predicates);
  return Stride;
}
 
bool LoopVectorizationLegality::isInvariant(Value *V) const {
  return LAI->isInvariant(V);
}
 
namespace {
/// A rewriter to build the SCEVs for each of the VF lanes in the expected
/// vectorized loop, which can then be compared to detect their uniformity. This
/// is done by replacing the AddRec SCEVs of the original scalar loop (TheLoop)
/// with new AddRecs where the step is multiplied by StepMultiplier and Offset *
/// Step is added. Also checks if all sub-expressions are analyzable w.r.t.
/// uniformity.
class SCEVAddRecForUniformityRewriter
    : public SCEVRewriteVisitor<SCEVAddRecForUniformityRewriter> {
  /// Multiplier to be applied to the step of AddRecs in TheLoop.
  unsigned StepMultiplier;
 
  /// Offset to be added to the AddRecs in TheLoop.
  unsigned Offset;
 
  /// Loop for which to rewrite AddRecsFor.
  Loop *TheLoop;
 
  /// Is any sub-expressions not analyzable w.r.t. uniformity?
  bool CannotAnalyze = false;
 
  bool canAnalyze() const { return !CannotAnalyze; }
 
public:
  SCEVAddRecForUniformityRewriter(ScalarEvolution &SE, unsigned StepMultiplier,
                                  unsigned Offset, Loop *TheLoop)
      : SCEVRewriteVisitor(SE), StepMultiplier(StepMultiplier), Offset(Offset),
        TheLoop(TheLoop) {}
 
  const SCEV *visitAddRecExpr(const SCEVAddRecExpr *Expr) {
    assert(Expr->getLoop() == TheLoop &&
           "addrec outside of TheLoop must be invariant and should have been "
           "handled earlier");
    // Build a new AddRec by multiplying the step by StepMultiplier and
    // incrementing the start by Offset * step.
    Type *Ty = Expr->getType();
    const SCEV *Step = Expr->getStepRecurrence(SE);
    if (!SE.isLoopInvariant(Step, TheLoop)) {
      CannotAnalyze = true;
      return Expr;
    }
    const SCEV *NewStep =
        SE.getMulExpr(Step, SE.getConstant(Ty, StepMultiplier));
    const SCEV *ScaledOffset = SE.getMulExpr(Step, SE.getConstant(Ty, Offset));
    const SCEV *NewStart =
        SE.getAddExpr(Expr->getStart(), SCEVUse(ScaledOffset));
    return SE.getAddRecExpr(NewStart, NewStep, TheLoop, SCEV::FlagNone);
  }
 
  const SCEV *visit(const SCEV *S) {
    if (CannotAnalyze || SE.isLoopInvariant(S, TheLoop))
      return S;
    return SCEVRewriteVisitor<SCEVAddRecForUniformityRewriter>::visit(S);
  }
 
  const SCEV *visitUnknown(const SCEVUnknown *S) {
    if (SE.isLoopInvariant(S, TheLoop))
      return S;
    // The value could vary across iterations.
    CannotAnalyze = true;
    return S;
  }
 
  const SCEV *visitCouldNotCompute(const SCEVCouldNotCompute *S) {
    // Could not analyze the expression.
    CannotAnalyze = true;
    return S;
  }
 
  static const SCEV *rewrite(const SCEV *S, ScalarEvolution &SE,
                             unsigned StepMultiplier, unsigned Offset,
                             Loop *TheLoop) {
    /// Bail out if the expression does not contain an UDiv expression.
    /// Uniform values which are not loop invariant require operations to strip
    /// out the lowest bits. For now just look for UDivs and use it to avoid
    /// re-writing UDIV-free expressions for other lanes to limit compile time.
    if (!SCEVExprContains(S,
                          [](const SCEV *S) { return isa<SCEVUDivExpr>(S); }))
      return SE.getCouldNotCompute();
 
    SCEVAddRecForUniformityRewriter Rewriter(SE, StepMultiplier, Offset,
                                             TheLoop);
    const SCEV *Result = Rewriter.visit(S);
 
    if (Rewriter.canAnalyze())
      return Result;
    return SE.getCouldNotCompute();
  }
};
 
} // namespace
 
bool LoopVectorizationLegality::isUniform(
    Value *V, std::optional<ElementCount> VF) const {
  if (isInvariant(V))
    return true;
  if (!VF || VF->isScalable())
    return false;
  if (VF->isScalar())
    return true;
 
  // Since we rely on SCEV for uniformity, if the type is not SCEVable, it is
  // never considered uniform.
  auto *SE = PSE.getSE();
  if (!SE->isSCEVable(V->getType()))
    return false;
  const SCEV *S = SE->getSCEV(V);
 
  // Rewrite AddRecs in TheLoop to step by VF and check if the expression for
  // lane 0 matches the expressions for all other lanes.
  unsigned FixedVF = VF->getKnownMinValue();
  const SCEV *FirstLaneExpr =
      SCEVAddRecForUniformityRewriter::rewrite(S, *SE, FixedVF, 0, TheLoop);
  if (isa<SCEVCouldNotCompute>(FirstLaneExpr))
    return false;
 
  // Make sure the expressions for lanes FixedVF-1..1 match the expression for
  // lane 0. We check lanes in reverse order for compile-time, as frequently
  // checking the last lane is sufficient to rule out uniformity.
  return all_of(reverse(seq<unsigned>(1, FixedVF)), [&](unsigned I) {
    const SCEV *IthLaneExpr =
        SCEVAddRecForUniformityRewriter::rewrite(S, *SE, FixedVF, I, TheLoop);
    return FirstLaneExpr == IthLaneExpr;
  });
}
 
bool LoopVectorizationLegality::isUniformMemOp(
    Instruction &I, std::optional<ElementCount> VF) const {
  Value *Ptr = getLoadStorePointerOperand(&I);
  if (!Ptr)
    return false;
  // Note: There's nothing inherent which prevents predicated loads and
  // stores from being uniform.  The current lowering simply doesn't handle
  // it; in particular, the cost model distinguishes scatter/gather from
  // scalar w/predication, and we currently rely on the scalar path.
  return isUniform(Ptr, VF) && !blockNeedsPredication(I.getParent());
}
 
/// Returns true if the type produced by \p I can be widened. Casts from vector
/// types and extractelement instructions cannot be widened. Struct results are
/// only supported if \p AllowStructCalls is set, for calls whose users are all
/// extractvalue instructions and whose struct element types can be widened.
static bool canWidenResultType(const Instruction &I, bool AllowStructCalls) {
  if (isa<ExtractElementInst>(I) ||
      (isa<CastInst>(I) &&
       !VectorType::isValidElementType(I.getOperand(0)->getType())))
    return false;
  Type *Ty = I.getType();
  if (!isa<StructType>(Ty))
    return canVectorizeTy(Ty);
  return AllowStructCalls && isa<CallInst>(I) && canVectorizeTy(Ty) &&
         all_of(I.users(), IsaPred<ExtractValueInst>);
}
 
/// Returns true if the types produced and stored by \p I can be widened,
/// otherwise reports a vectorization failure for \p TheLoop and returns false.
static bool canWidenTypes(Instruction &I, bool AllowStructCalls,
                          OptimizationRemarkEmitter *ORE, Loop *TheLoop) {
  if (!canWidenResultType(I, AllowStructCalls)) {
    reportVectorizationFailure("Found unvectorizable type",
                               "instruction return type cannot be vectorized",
                               "CantVectorizeInstructionReturnType", ORE,
                               TheLoop, &I);
    return false;
  }
  auto *SI = dyn_cast<StoreInst>(&I);
  if (SI && !VectorType::isValidElementType(SI->getValueOperand()->getType())) {
    reportVectorizationFailure("Store instruction cannot be vectorized",
                               "CantVectorizeStore", ORE, TheLoop, SI);
    return false;
  }
  return true;
}
 
/// Returns true if \p I does not use a swifterror value, otherwise reports a
/// vectorization failure for \p TheLoop and returns false.
/// TODO: Allow unmasked uniform accesses through loop-invariant swifterror
/// pointers once memory operations on them are guaranteed to stay scalar.
static bool canVectorizeSwiftErrorUses(Instruction &I,
                                       OptimizationRemarkEmitter *ORE,
                                       Loop *TheLoop) {
  if (none_of(I.operands(), [](Value *Op) { return Op->isSwiftError(); }))
    return true;
  reportVectorizationFailure("Found a use of a swifterror value",
                             "swifterror value cannot be vectorized",
                             "CantVectorizeSwiftError", ORE, TheLoop, &I);
  return false;
}
 
/// Calls with operand bundles other than llvm.assume cannot be widened.
static bool canVectorizeOperandBundles(Instruction &I,
                                       OptimizationRemarkEmitter *ORE,
                                       Loop *TheLoop) {
  auto *CB = dyn_cast<CallBase>(&I);
  if (!CB || !CB->hasOperandBundles() || isa<AssumeInst>(CB))
    return true;
  reportVectorizationFailure("Found a call with operand bundles",
                             "call with operand bundles cannot be vectorized",
                             "CantVectorizeOperandBundles", ORE, TheLoop, &I);
  return false;
}
 
bool LoopVectorizationLegality::canVectorizeOuterLoop() {
  assert(!TheLoop->isInnermost() && "We are not vectorizing an outer loop.");
  // Store the result and return it at the end instead of exiting early, in case
  // allowExtraAnalysis is used to report multiple reasons for not vectorizing.
  bool Result = true;
  bool DoExtraAnalysis = ORE->allowExtraAnalysis(DEBUG_TYPE);
 
  for (BasicBlock *BB : TheLoop->blocks()) {
    // Instructions in the loop nest are widened, so the types they produce and
    // store must be widenable. Struct-returning calls are not supported yet.
    // Uses of swifterror values must remain scalar. Calls with operand bundles
    // cannot be widened.
    for (Instruction &I : *BB) {
      if (canWidenTypes(I, /*AllowStructCalls=*/false, ORE, TheLoop) &&
          canVectorizeSwiftErrorUses(I, ORE, TheLoop) &&
          canVectorizeOperandBundles(I, ORE, TheLoop))
        continue;
      if (!DoExtraAnalysis)
        return false;
      Result = false;
    }
 
    // Don't try to vectorize outer loops with atomic or volatile accesses.
    for (Instruction &I : *BB) {
      if (!I.isAtomic() && !I.isVolatile())
        continue;
      reportVectorizationFailure(
          "Unsupported volatile or atomic memory operation",
          "instruction cannot be vectorized", "CantVectorizeInstruction", ORE,
          TheLoop, &I);
      if (DoExtraAnalysis)
        Result = false;
      else
        return false;
    }
 
    // Check whether the BB terminator is a branch. Any other terminator is
    // not supported yet.
    Instruction *Term = BB->getTerminator();
    if (!isa<UncondBrInst, CondBrInst>(Term)) {
      reportVectorizationFailure(
          "Unsupported basic block terminator",
          "loop control flow is not understood by vectorizer",
          "CFGNotUnderstood", ORE, TheLoop);
      if (DoExtraAnalysis)
        Result = false;
      else
        return false;
    }
 
    // Check whether the branch is a supported one. Only unconditional
    // branches, conditional branches with an outer loop uniform condition or
    // backedges are supported.
    // FIXME: We skip these checks when VPlan predication is enabled as we
    // want to allow divergent branches. This whole check will be removed
    // once VPlan predication is on by default.
    auto *Br = dyn_cast<CondBrInst>(Term);
    if (Br && !TheLoop->isLoopLatch(BB)) {
      bool IsUniformCondBr = TheLoop->isLoopInvariant(Br->getCondition());
 
      Value *Lhs = nullptr;
      Value *Rhs = nullptr;
      auto *SE = PSE.getSE();
      if (match(Br->getCondition(), m_c_ICmp(m_Value(Lhs), m_Value(Rhs))) &&
          !IsUniformCondBr && SE->isSCEVable(Lhs->getType())) {
        const SCEV *LhsExpr = PSE.getSCEV(Lhs);
        const SCEV *RhsExpr = PSE.getSCEV(Rhs);
        IsUniformCondBr |= (SE->isLoopUniform(LhsExpr, TheLoop) &&
                            SE->isLoopUniform(RhsExpr, TheLoop));
      }
 
      // If the condition is not uniform, report a failure. We currently require
      // uniform conditions to avoid the complexity of vectorizing divergent
      // control flow in the outer loop.
      if (!IsUniformCondBr) {
        reportVectorizationFailure(
            "Outer loop contains divergent conditional branch",
            "loop control flow is not understood by vectorizer",
            "CFGNotUnderstood", ORE, TheLoop);
        if (DoExtraAnalysis)
          Result = false;
        else
          return false;
      }
    }
  }
 
  // Each nested loop must exit via its latch only, as a region with the latch
  // as its only exiting block is created for it. Note that the branch check
  // rejects divergent exits, but exits with an outer-loop uniform condition
  // are allowed through.
  SmallVector<Loop *, 4> LoopNest = TheLoop->getLoopsInPreorder();
  for (Loop *Lp : drop_begin(LoopNest)) {
    if (Lp->getExitingBlock() != Lp->getLoopLatch()) {
      reportVectorizationFailure(
          "Nested loop does not exit via its latch",
          "loop control flow is not understood by vectorizer",
          "CFGNotUnderstood", ORE, TheLoop);
      if (DoExtraAnalysis)
        Result = false;
      else
        return false;
    }
  }
 
  // Check whether we are able to set up outer loop induction.
  if (!setupOuterLoopInductions()) {
    reportVectorizationFailure("Unsupported outer loop Phi(s)",
                               "UnsupportedPhi", ORE, TheLoop);
    if (DoExtraAnalysis)
      Result = false;
    else
      return false;
  }
 
  // Like for inner loops, the widest induction type is used for the canonical
  // IV and trip count.
  if (!canDetermineWidestInductionType())
    return false;
 
  return Result;
}
 
bool LoopVectorizationLegality::canDetermineWidestInductionType() {
  if (Inductions.empty()) {
    reportVectorizationFailure(
        "Did not find one integer induction var",
        "loop induction variable could not be identified",
        "NoInductionVariable", ORE, TheLoop);
    return false;
  }
  if (!WidestIndTy) {
    reportVectorizationFailure(
        "Did not find one integer induction var",
        "integer loop induction variable could not be identified",
        "NoIntegerInductionVariable", ORE, TheLoop);
    return false;
  }
  return true;
}
 
void LoopVectorizationLegality::addInductionPhi(PHINode *Phi,
                                                const InductionDescriptor &ID) {
  Inductions[Phi] = ID;
 
  Type *PhiTy = Phi->getType();
  const DataLayout &DL = Phi->getDataLayout();
 
  assert((PhiTy->isIntOrPtrTy() || PhiTy->isFloatingPointTy()) &&
         "Expected int, ptr, or FP induction phi type");
 
  // Get the widest type.
  if (PhiTy->isIntOrPtrTy()) {
    if (!WidestIndTy)
      WidestIndTy = getInductionIntegerTy(DL, PhiTy);
    else
      WidestIndTy = getWiderInductionTy(DL, PhiTy, WidestIndTy);
  }
 
  // Int inductions are special because we only allow one IV.
  if (ID.getKind() == InductionDescriptor::IK_IntInduction &&
      ID.getConstStepValue() && ID.getConstStepValue()->isOne() &&
      isa<Constant>(ID.getStartValue()) &&
      cast<Constant>(ID.getStartValue())->isNullValue()) {
 
    // Use the phi node with the widest type as induction. Use the last
    // one if there are multiple (no good reason for doing this other
    // than it is expedient). We've checked that it begins at zero and
    // steps by one, so this is a canonical induction variable.
    if (!PrimaryInduction || PhiTy == WidestIndTy)
      PrimaryInduction = Phi;
  }
 
  LLVM_DEBUG(dbgs() << "LV: Found an induction variable.\n");
}
 
bool LoopVectorizationLegality::addConditionalInduction(
    PHINode *Phi, const ConditionalInductionDescriptor &CondID) {
  DenseMap<Value *, const SCEVAddRecExpr *> CompressedPtrsForCondID;
  if (!collectCompressedPtrs(CompressedPtrsForCondID, *TheLoop, CondID,
                             *PSE.getSE())) {
    reportVectorizationFailure(
        "Unsupported user of conditional induction found",
        "UnsupportedConditionalInductionUse", ORE, TheLoop);
    return false;
  }
 
  ConditionalInductions[Phi] = CondID;
 
  for (auto [Ptr, PtrAddRec] : CompressedPtrsForCondID) {
    LLVM_DEBUG(dbgs() << "LV: Found compressed pointer: " << *Ptr << '\n');
    assert(PtrAddRec->isAffine() && "Expected affine SCEVAddRecExpr");
    CompressedPtrs[Ptr] = CompressedPtrInfo{Phi, PtrAddRec};
  }
 
  return true;
}
 
/// Returns true if \p ID is a pointer induction with a non-constant step. Such
/// inductions are rejected unless -lv-strided-pointer-ivs is set, to preserve
/// historical vectorizer behavior after a generalization of the IVDescriptor
/// code. The intent is to remove this check, but issues around code quality
/// for such loops have to be fixed first.
static bool isDisallowedStridedPointerInduction(const InductionDescriptor &ID,
                                                const VectorizeOptions &Opts) {
  if (Opts.lv_strided_pointer_ivs)
    return false;
  return ID.getKind() == InductionDescriptor::IK_PtrInduction &&
         !ID.getConstStepValue();
}
 
bool LoopVectorizationLegality::setupOuterLoopInductions() {
  BasicBlock *Header = TheLoop->getHeader();
 
  // Returns true if a given Phi is a supported induction.
  auto IsSupportedPhi = [&](PHINode &Phi) -> bool {
    InductionDescriptor ID;
    if (InductionDescriptor::isInductionPHI(&Phi, TheLoop, PSE, ID) &&
        (ID.getKind() == InductionDescriptor::IK_IntInduction ||
         ID.getKind() == InductionDescriptor::IK_PtrInduction) &&
        !isDisallowedStridedPointerInduction(ID, Opts)) {
      addInductionPhi(&Phi, ID);
      return true;
    }
    // Bail out for any Phi in the outer loop header that is not a supported
    // induction.
    LLVM_DEBUG(
        dbgs() << "LV: Found unsupported PHI for outer loop vectorization.\n");
    return false;
  };
 
  return llvm::all_of(Header->phis(), IsSupportedPhi);
}
 
/// Checks if a function is scalarizable according to the TLI, in
/// the sense that it should be vectorized and then expanded in
/// multiple scalar calls. This is represented in the
/// TLI via mappings that do not specify a vector name, as in the
/// following example:
///
///    const VecDesc VecIntrinsics[] = {
///      {"llvm.phx.abs.i32", "", 4}
///    };
static bool isTLIScalarize(const TargetLibraryInfo &TLI, const CallInst &CI) {
  const StringRef ScalarName = CI.getCalledFunction()->getName();
  bool Scalarize = TLI.isFunctionVectorizable(ScalarName);
  // Check that all known VFs are not associated to a vector
  // function, i.e. the vector name is emty.
  if (Scalarize) {
    ElementCount WidestFixedVF, WidestScalableVF;
    TLI.getWidestVF(ScalarName, WidestFixedVF, WidestScalableVF);
    for (ElementCount VF = ElementCount::getFixed(2);
         ElementCount::isKnownLE(VF, WidestFixedVF); VF *= 2)
      Scalarize &= !TLI.isFunctionVectorizable(ScalarName, VF);
    for (ElementCount VF = ElementCount::getScalable(1);
         ElementCount::isKnownLE(VF, WidestScalableVF); VF *= 2)
      Scalarize &= !TLI.isFunctionVectorizable(ScalarName, VF);
    assert((WidestScalableVF.isZero() || !Scalarize) &&
           "Caller may decide to scalarize a variant using a scalable VF");
  }
  return Scalarize;
}
 
bool LoopVectorizationLegality::canVectorizeInstrs() {
  bool DoExtraAnalysis = ORE->allowExtraAnalysis(DEBUG_TYPE);
  bool Result = true;
 
  // For each block in the loop.
  for (BasicBlock *BB : TheLoop->blocks()) {
    // Scan the instructions in the block and look for hazards.
    for (Instruction &I : *BB) {
      Result &= canVectorizeInstr(I);
      if (!DoExtraAnalysis && !Result)
        return false;
    }
  }
 
  if (!PrimaryInduction) {
    if (!canDetermineWidestInductionType())
      return false;
    LLVM_DEBUG(dbgs() << "LV: Did not find one integer induction var.\n");
  }
 
  // Now we know the widest induction type, check if our found induction
  // is the same size. If it's not, unset it here.
  if (PrimaryInduction && WidestIndTy != PrimaryInduction->getType())
    PrimaryInduction = nullptr;
 
  return Result;
}
 
bool LoopVectorizationLegality::canVectorizeInstr(Instruction &I) {
  BasicBlock *BB = I.getParent();
  BasicBlock *Header = TheLoop->getHeader();
 
  if (auto *Phi = dyn_cast<PHINode>(&I)) {
    Type *PhiTy = Phi->getType();
    // Check that this PHI type is allowed.
    if (!PhiTy->isIntegerTy() && !PhiTy->isFloatingPointTy() &&
        !PhiTy->isPointerTy()) {
      reportVectorizationFailure(
          "Found a non-int non-pointer PHI",
          "loop control flow is not understood by vectorizer",
          "CFGNotUnderstood", ORE, TheLoop);
      return false;
    }
 
    // If this PHINode is not in the header block, then we know that we
    // can convert it to select during if-conversion. No need to check if
    // the PHIs in this block are induction or reduction variables.
    if (BB != Header) {
      // Non-header phi nodes that have outside uses can be vectorized. Unsafe
      // cyclic dependencies with header phis are identified during legalization
      // for reduction, induction and fixed order recurrences.
      return true;
    }
 
    // We only allow if-converted PHIs with exactly two incoming values.
    if (Phi->getNumIncomingValues() != 2) {
      reportVectorizationFailure(
          "Found an invalid PHI",
          "loop control flow is not understood by vectorizer",
          "CFGNotUnderstood", ORE, TheLoop, Phi);
      return false;
    }
 
    RecurrenceDescriptor RedDes;
    if (RecurrenceDescriptor::isReductionPHI(Phi, TheLoop, RedDes, DB, AC, DT,
                                             PSE.getSE())) {
      Requirements->addExactFPMathInst(RedDes.getExactFPMathInst());
      Reductions[Phi] = std::move(RedDes);
      assert((!RedDes.hasUsesOutsideReductionChain() ||
              RecurrenceDescriptor::isMinMaxRecurrenceKind(
                  RedDes.getRecurrenceKind())) &&
             "Only min/max recurrences are allowed to have multiple uses "
             "currently");
      return true;
    }
 
    InductionDescriptor ID;
    if (InductionDescriptor::isInductionPHI(Phi, TheLoop, PSE, ID) &&
        !isDisallowedStridedPointerInduction(ID, Opts)) {
      addInductionPhi(Phi, ID);
      Requirements->addExactFPMathInst(ID.getExactFPMathInst());
      return true;
    }
 
    ConditionalInductionDescriptor CondID;
    if (Opts.lv_compressing_patterns &&
        ConditionalInductionDescriptor::isConditionalInductionPHI(
            Phi, TheLoop, CondID, *PSE.getSE())) {
      return addConditionalInduction(Phi, CondID);
    }
 
    if (RecurrenceDescriptor::isFixedOrderRecurrence(Phi, TheLoop, DT)) {
      FixedOrderRecurrences.insert(Phi);
      return true;
    }
 
    // As a last resort, coerce the PHI to a AddRec expression
    // and re-try classifying it a an induction PHI.
    if (InductionDescriptor::isInductionPHI(Phi, TheLoop, PSE, ID, true) &&
        !isDisallowedStridedPointerInduction(ID, Opts)) {
      addInductionPhi(Phi, ID);
      return true;
    }
 
    if (isDisallowedStridedPointerInduction(ID, Opts)) {
      reportVectorizationFailure("Found a disallowed pointer induction",
                                 "pointer induction with a non-constant step "
                                 "could not be vectorized",
                                 "StridedPointerInduction", ORE, TheLoop, Phi);
      return false;
    }
 
    reportVectorizationFailure("Found an unidentified PHI",
                               "value that could not be identified as "
                               "reduction is used outside the loop",
                               "NonReductionValueUsedOutsideLoop", ORE, TheLoop,
                               Phi);
    return false;
  } // end of PHI handling
 
  if (!canVectorizeSwiftErrorUses(I, ORE, TheLoop) ||
      !canVectorizeOperandBundles(I, ORE, TheLoop))
    return false;
 
  // We handle calls that:
  //   * Have a mapping to an IR intrinsic.
  //   * Have a vector version available.
  auto *CI = dyn_cast<CallInst>(&I);
 
  if (CI && !getVectorIntrinsicIDForCall(CI, TLI) &&
      !(CI->getCalledFunction() && TLI &&
        (!VFDatabase::getMappings(*CI).empty() || isTLIScalarize(*TLI, *CI)))) {
    // If the call is a recognized math libary call, it is likely that
    // we can vectorize it given loosened floating-point constraints.
    bool IsMathLibCall =
        TLI && CI->getCalledFunction() && CI->getType()->isFloatingPointTy() &&
        TLI->hasOptimizedCodeGen(
            TLI->getLibFunc(CI->getCalledFunction()->getName()));
 
    if (IsMathLibCall) {
      // TODO: Ideally, we should not use clang-specific language here,
      // but it's hard to provide meaningful yet generic advice.
      // Also, should this be guarded by allowExtraAnalysis() and/or be part
      // of the returned info from isFunctionVectorizable()?
      reportVectorizationFailure(
          "Found a non-intrinsic callsite",
          "library call cannot be vectorized. "
          "Try compiling with -fno-math-errno, -ffast-math, "
          "or similar flags",
          "CantVectorizeLibcall", ORE, TheLoop, CI);
    } else {
      reportVectorizationFailure("Found a non-intrinsic callsite",
                                 "call instruction cannot be vectorized",
                                 "CantVectorizeLibcall", ORE, TheLoop, CI);
    }
    return false;
  }
 
  // Some intrinsics have scalar arguments and should be same in order for
  // them to be vectorized (i.e. loop invariant).
  if (CI) {
    auto *SE = PSE.getSE();
    Intrinsic::ID IntrinID = getVectorIntrinsicIDForCall(CI, TLI);
    for (unsigned Idx = 0; Idx < CI->arg_size(); ++Idx)
      if (isVectorIntrinsicWithScalarOpAtArg(IntrinID, Idx, TTI)) {
        if (!SE->isLoopInvariant(PSE.getSCEV(CI->getOperand(Idx)), TheLoop)) {
          reportVectorizationFailure(
              "Found unvectorizable intrinsic",
              "intrinsic instruction cannot be vectorized",
              "CantVectorizeIntrinsic", ORE, TheLoop, CI);
          return false;
        }
      }
  }
 
  // If we found a vectorized variant of a function, note that so LV can
  // make better decisions about maximum VF.
  if (CI && !VFDatabase::getMappings(*CI).empty())
    VecCallVariantsFound = true;
 
  // Check that the instruction return and stored types are vectorizable.
  if (!canWidenTypes(I, /*AllowStructCalls=*/true, ORE, TheLoop))
    return false;
 
  if (auto *ST = dyn_cast<StoreInst>(&I)) {
    // For nontemporal stores, check that a nontemporal vector version is
    // supported on the target.
    if (ST->getMetadata(LLVMContext::MD_nontemporal)) {
      // Arbitrarily try a vector of 2 elements.
      auto *VecTy =
          FixedVectorType::get(ST->getValueOperand()->getType(), /*NumElts=*/2);
      assert(VecTy && "did not find vectorized version of stored type");
      if (!TTI->isLegalNTStore(VecTy, ST->getAlign())) {
        reportVectorizationFailure(
            "nontemporal store instruction cannot be vectorized",
            "CantVectorizeNontemporalStore", ORE, TheLoop, ST);
        return false;
      }
    }
 
  } else if (auto *LD = dyn_cast<LoadInst>(&I)) {
    if (LD->getMetadata(LLVMContext::MD_nontemporal)) {
      // For nontemporal loads, check that a nontemporal vector version is
      // supported on the target (arbitrarily try a vector of 2 elements).
      auto *VecTy = FixedVectorType::get(I.getType(), /*NumElts=*/2);
      assert(VecTy && "did not find vectorized version of load type");
      if (!TTI->isLegalNTLoad(VecTy, LD->getAlign())) {
        reportVectorizationFailure(
            "nontemporal load instruction cannot be vectorized",
            "CantVectorizeNontemporalLoad", ORE, TheLoop, LD);
        return false;
      }
    }
 
    // FP instructions can allow unsafe algebra, thus vectorizable by
    // non-IEEE-754 compliant SIMD units.
    // This applies to floating-point math operations and calls, not memory
    // operations, shuffles, or casts, as they don't change precision or
    // semantics.
  } else if (I.getType()->isFloatingPointTy() && (CI || I.isBinaryOp()) &&
             !I.isFast()) {
    LLVM_DEBUG(dbgs() << "LV: Found FP op with unsafe algebra.\n");
    Hints->setPotentiallyUnsafe();
  }
 
  return true;
}
 
/// Find histogram operations that match high-level code in loops:
/// \code
/// buckets[indices[i]] = UpdateOp(buckets[indices[i]], Val);
/// \endcode
/// Where UpdateOp can be add, sub, uadd.sat, umax, or umin.
///
/// It matches a pattern starting from \p HSt, which Stores to the 'buckets'
/// array the computed histogram. It uses an update instruction to update all
/// counts, storing them using a loop-variant index Load from the 'indices'
/// input array.
///
/// On successful matches it updates the STATISTIC 'HistogramsDetected',
/// regardless of hardware support. When there is support, it additionally
/// stores the UpdateOp/Load pairs in \p HistogramCounts, as well the pointers
/// used to update histogram in \p HistogramPtrs.
static bool findHistogram(LoadInst *LI, StoreInst *HSt, Loop *TheLoop,
                          const PredicatedScalarEvolution &PSE,
                          SmallVectorImpl<HistogramInfo> &Histograms) {
 
  // Store value must come from an update operation (binary op or intrinsic).
  Instruction *HPtrInstr = nullptr;
  Instruction *HUpdateOp = nullptr;
  if (!match(HSt, m_Store(m_Instruction(HUpdateOp), m_Instruction(HPtrInstr))))
    return false;
 
  // The update operation must modify the bucket value by a loop invariant
  // amount. Supported operations: add, sub, uadd.sat, umax, umin.
  // FIXME: We assume the loop invariant term is on the RHS.
  //        Fine for an immediate/constant, but maybe not a generic value?
  Value *HIncVal = nullptr;
  HistogramUpdateKind UpdateKind;
  auto Bucket = m_Load(m_Specific(HPtrInstr));
  if (match(HUpdateOp, m_Add(Bucket, m_Value(HIncVal))))
    UpdateKind = HistogramUpdateKind::Add;
  else if (match(HUpdateOp, m_Sub(Bucket, m_Value(HIncVal))))
    UpdateKind = HistogramUpdateKind::Sub;
  else if (match(HUpdateOp,
                 m_Intrinsic<Intrinsic::uadd_sat>(Bucket, m_Value(HIncVal))))
    UpdateKind = HistogramUpdateKind::UAddSat;
  else if (match(HUpdateOp, m_UMax(Bucket, m_Value(HIncVal))))
    UpdateKind = HistogramUpdateKind::UMax;
  else if (match(HUpdateOp, m_UMin(Bucket, m_Value(HIncVal))))
    UpdateKind = HistogramUpdateKind::UMin;
  else
    return false;
 
  // Make sure the increment value is loop invariant.
  if (!TheLoop->isLoopInvariant(HIncVal))
    return false;
 
  // The address to store is calculated through a GEP Instruction.
  GetElementPtrInst *GEP = dyn_cast<GetElementPtrInst>(HPtrInstr);
  if (!GEP)
    return false;
 
  // Restrict address calculation to constant indices except for the last term.
  Value *HIdx = nullptr;
  for (Value *Index : GEP->indices()) {
    if (HIdx)
      return false;
    if (!isa<ConstantInt>(Index))
      HIdx = Index;
  }
 
  if (!HIdx)
    return false;
 
  // Check that the index is calculated by loading from another array. Ignore
  // any extensions.
  // FIXME: Support indices from other sources than a linear load from memory?
  //        We're currently trying to match an operation looping over an array
  //        of indices, but there could be additional levels of indirection
  //        in place, or possibly some additional calculation to form the index
  //        from the loaded data.
  Value *VPtrVal;
  if (!match(HIdx, m_ZExtOrSExtOrSelf(m_Load(m_Value(VPtrVal)))))
    return false;
 
  // Make sure the index address varies in this loop, not an outer loop.
  const auto *AR = dyn_cast<SCEVAddRecExpr>(PSE.getSE()->getSCEV(VPtrVal));
  if (!AR || AR->getLoop() != TheLoop)
    return false;
 
  // Ensure we'll have the same mask by checking that all parts of the histogram
  // (gather load, update, scatter store) are in the same block.
  LoadInst *IndexedLoad = cast<LoadInst>(HUpdateOp->getOperand(0));
  BasicBlock *LdBB = IndexedLoad->getParent();
  if (LdBB != HUpdateOp->getParent() || LdBB != HSt->getParent())
    return false;
 
  // The bucket value and its update must not be used outside the histogram.
  if (!IndexedLoad->hasOneUse() || !HUpdateOp->hasOneUse())
    return false;
 
  LLVM_DEBUG(dbgs() << "LV: Found histogram for: " << *HSt << "\n");
 
  // Store the operations that make up the histogram.
  Histograms.emplace_back(IndexedLoad, HUpdateOp, HSt, UpdateKind);
  return true;
}
 
bool LoopVectorizationLegality::canVectorizeIndirectUnsafeDependences() {
  // For now, we only support an IndirectUnsafe dependency that calculates
  // a histogram
  if (!Opts.enable_histogram_loop_vectorization)
    return false;
 
  // Find a single IndirectUnsafe dependency.
  const MemoryDepChecker::Dependence *IUDep = nullptr;
  const MemoryDepChecker &DepChecker = LAI->getDepChecker();
  const auto *Deps = DepChecker.getDependences();
  // If there were too many dependences, LAA abandons recording them. We can't
  // proceed safely if we don't know what the dependences are.
  if (!Deps)
    return false;
 
  for (const MemoryDepChecker::Dependence &Dep : *Deps) {
    // Ignore dependencies that are either known to be safe or can be
    // checked at runtime.
    if (MemoryDepChecker::Dependence::isSafeForVectorization(Dep.Type) !=
        MemoryDepChecker::VectorizationSafetyStatus::Unsafe)
      continue;
 
    // We're only interested in IndirectUnsafe dependencies here, where the
    // address might come from a load from memory. We also only want to handle
    // one such dependency, at least for now.
    if (Dep.Type != MemoryDepChecker::Dependence::IndirectUnsafe || IUDep)
      return false;
 
    IUDep = &Dep;
  }
  if (!IUDep)
    return false;
 
  // For now only normal loads and stores are supported.
  LoadInst *LI = dyn_cast<LoadInst>(IUDep->getSource(DepChecker));
  StoreInst *SI = dyn_cast<StoreInst>(IUDep->getDestination(DepChecker));
 
  if (!LI || !SI)
    return false;
 
  LLVM_DEBUG(dbgs() << "LV: Checking for a histogram on: " << *SI << "\n");
  return findHistogram(LI, SI, TheLoop, LAI->getPSE(), Histograms);
}
 
bool LoopVectorizationLegality::canVectorizeMemory() {
  LAI = &LAIs.getInfo(*TheLoop);
  const OptimizationRemarkAnalysis *LAR = LAI->getReport();
  if (LAR) {
    ORE->emit([&]() {
      return OptimizationRemarkAnalysis(LV_NAME, "loop not vectorized: ", *LAR);
    });
  }
 
  // We can vectorize stores to invariant address when final reduction value is
  // guaranteed to be stored at the end of the loop. Also, if decision to
  // vectorize loop is made, runtime checks are added so as to make sure that
  // invariant address won't alias with any other objects.
  if (!LAI->getStoresToInvariantAddresses().empty()) {
    // For each invariant address, check if last stored value is unconditional
    // and the address is not calculated inside the loop.
    for (StoreInst *SI : LAI->getStoresToInvariantAddresses()) {
      if (!isInvariantStoreOfReduction(SI))
        continue;
 
      if (blockNeedsPredication(SI->getParent())) {
        reportVectorizationFailure(
            "We don't allow storing to uniform addresses",
            "write of conditional recurring variant value to a loop "
            "invariant address could not be vectorized",
            "CantVectorizeStoreToLoopInvariantAddress", ORE, TheLoop);
        return false;
      }
 
      // Invariant address should be defined outside of loop. LICM pass usually
      // makes sure it happens, but in rare cases it does not, we do not want
      // to overcomplicate vectorization to support this case.
      if (Instruction *Ptr = dyn_cast<Instruction>(SI->getPointerOperand())) {
        if (TheLoop->contains(Ptr)) {
          reportVectorizationFailure(
              "Invariant address is calculated inside the loop",
              "write to a loop invariant address could not "
              "be vectorized",
              "CantVectorizeStoreToLoopInvariantAddress", ORE, TheLoop);
          return false;
        }
      }
    }
 
    if (LAI->hasStoreStoreDependenceInvolvingLoopInvariantAddress()) {
      // For each invariant address, check its last stored value is the result
      // of one of our reductions.
      //
      // We do not check if dependence with loads exists because that is already
      // checked via hasLoadStoreDependenceInvolvingLoopInvariantAddress.
      ScalarEvolution *SE = PSE.getSE();
      SmallVector<StoreInst *, 4> UnhandledStores;
      for (StoreInst *SI : LAI->getStoresToInvariantAddresses()) {
        if (isInvariantStoreOfReduction(SI)) {
          // Earlier stores to this address are effectively deadcode.
          // With opaque pointers it is possible for one pointer to be used with
          // different sizes of stored values:
          //    store i32 0, ptr %x
          //    store i8 0, ptr %x
          // The latest store doesn't complitely overwrite the first one in the
          // example. That is why we have to make sure that types of stored
          // values are same.
          // TODO: Check that bitwidth of unhandled store is smaller then the
          // one that overwrites it and add a test.
          erase_if(UnhandledStores, [SE, SI](StoreInst *I) {
            return storeToSameAddress(SE, SI, I) &&
                   I->getValueOperand()->getType() ==
                       SI->getValueOperand()->getType();
          });
          continue;
        }
        UnhandledStores.push_back(SI);
      }
 
      bool IsOK = UnhandledStores.empty();
      // TODO: we should also validate against InvariantMemSets.
      if (!IsOK) {
        reportVectorizationFailure(
            "We don't allow storing to uniform addresses",
            "write to a loop invariant address could not "
            "be vectorized",
            "CantVectorizeStoreToLoopInvariantAddress", ORE, TheLoop);
        return false;
      }
    }
  }
 
  if (!LAI->canVectorizeMemory()) {
    if (hasUncountableExitWithSideEffects()) {
      reportVectorizationFailure(
          "Cannot vectorize unsafe dependencies in uncountable exit loop with "
          "side effects",
          "CantVectorizeUnsafeDependencyForEELoopWithSideEffects", ORE,
          TheLoop);
      return false;
    }
 
    return canVectorizeIndirectUnsafeDependences();
  }
 
  if (LAI->hasLoadStoreDependenceInvolvingLoopInvariantAddress()) {
    reportVectorizationFailure("We don't allow storing to uniform addresses",
                               "write to a loop invariant address could not "
                               "be vectorized",
                               "CantVectorizeStoreToLoopInvariantAddress", ORE,
                               TheLoop);
    return false;
  }
 
  PSE.addPredicate(LAI->getPSE().getPredicate());
  return true;
}
 
bool LoopVectorizationLegality::canVectorizeFPMath(
    bool EnableStrictReductions) {
 
  // First check if there is any ExactFP math or if we allow reassociations
  if (!Requirements->getExactFPInst() || Hints->allowReordering())
    return true;
 
  // If the above is false, we have ExactFPMath & do not allow reordering.
  // If the EnableStrictReductions flag is set, first check if we have any
  // Exact FP induction vars, which we cannot vectorize.
  if (!EnableStrictReductions ||
      any_of(getInductionVars().values(),
             [](const InductionDescriptor &IndDesc) -> bool {
               return IndDesc.getExactFPMathInst();
             }))
    return false;
 
  // We can now only vectorize if all reductions with Exact FP math also
  // have the isOrdered flag set, which indicates that we can move the
  // reduction operations in-loop.
  return (all_of(getReductionVars().values(),
                 [](const RecurrenceDescriptor &RdxDesc) -> bool {
                   return !RdxDesc.hasExactFPMath() || RdxDesc.isOrdered();
                 }));
}
 
bool LoopVectorizationLegality::isInvariantStoreOfReduction(StoreInst *SI) {
  return any_of(getReductionVars().values(),
                [&](const RecurrenceDescriptor &RdxDesc) -> bool {
                  return RdxDesc.IntermediateStore == SI;
                });
}
 
bool LoopVectorizationLegality::isInvariantAddressOfReduction(Value *V) {
  return any_of(getReductionVars().values(),
                [&](const RecurrenceDescriptor &RdxDesc) -> bool {
                  if (!RdxDesc.IntermediateStore)
                    return false;
 
                  ScalarEvolution *SE = PSE.getSE();
                  Value *InvariantAddress =
                      RdxDesc.IntermediateStore->getPointerOperand();
                  return V == InvariantAddress ||
                         SE->getSCEV(V) == SE->getSCEV(InvariantAddress);
                });
}
 
bool LoopVectorizationLegality::isInductionPhi(const Value *V) const {
  Value *In0 = const_cast<Value *>(V);
  PHINode *PN = dyn_cast_or_null<PHINode>(In0);
  if (!PN)
    return false;
 
  return Inductions.count(PN);
}
 
bool LoopVectorizationLegality::isFixedOrderRecurrence(
    const PHINode *Phi) const {
  return FixedOrderRecurrences.count(Phi);
}
 
bool LoopVectorizationLegality::blockNeedsPredication(
    const BasicBlock *BB) const {
  BasicBlock *Latch = TheLoop->getLoopLatch();
 
  // Without a latch, we cannot properly answer blockNeedsPredication,
  // return early.
  if (!Latch) {
    assert(ORE->allowExtraAnalysis(DEBUG_TYPE) &&
           !canVectorizeLoopCFG(TheLoop, /*UseVPlanNativePath=*/false) &&
           "Loop shape should have been rejected by earlier checks");
    return false;
  }
 
  // When vectorizing early exits, create predicates for the latch block only.
  // For a single early exit, it must be a direct predecessor of the latch.
  // For multiple early exits, they form a chain where each exiting block
  // dominates all subsequent blocks up to the latch.
  if (hasUncountableEarlyExit())
    return BB == Latch;
  return LoopAccessInfo::blockNeedsPredication(BB, TheLoop, DT);
}
 
bool LoopVectorizationLegality::blockCanBePredicated(
    BasicBlock *BB, SmallPtrSetImpl<Value *> &SafePtrs,
    SmallPtrSetImpl<const Instruction *> &MaskedOp) const {
  for (Instruction &I : *BB) {
    // We can predicate blocks with calls to assume, as long as we drop them in
    // case we flatten the CFG via predication.
    if (match(&I, m_Intrinsic<Intrinsic::assume>())) {
      MaskedOp.insert(&I);
      continue;
    }
 
    // Do not let llvm.experimental.noalias.scope.decl block the vectorization.
    // TODO: there might be cases that it should block the vectorization. Let's
    // ignore those for now.
    if (isa<NoAliasScopeDeclInst>(&I))
      continue;
 
    // We can allow masked calls if there's at least one vector variant, even
    // if we end up scalarizing due to the cost model calculations.
    // TODO: Allow other calls if they have appropriate attributes... readonly
    // and argmemonly?
    if (CallInst *CI = dyn_cast<CallInst>(&I))
      if (VFDatabase::hasMaskedVariant(*CI)) {
        MaskedOp.insert(CI);
        continue;
      }
 
    // Loads are handled via masking (or speculated if safe to do so.)
    if (auto *LI = dyn_cast<LoadInst>(&I)) {
      if (!SafePtrs.count(LI->getPointerOperand()))
        MaskedOp.insert(LI);
      continue;
    }
 
    // Predicated store requires some form of masking:
    // 1) masked store HW instruction,
    // 2) emulation via load-blend-store (only if safe and legal to do so,
    //    be aware on the race conditions), or
    // 3) element-by-element predicate check and scalar store.
    if (auto *SI = dyn_cast<StoreInst>(&I)) {
      MaskedOp.insert(SI);
      continue;
    }
 
    if (I.mayReadFromMemory() || I.mayWriteToMemory() || I.mayThrow())
      return false;
  }
 
  return true;
}
 
bool LoopVectorizationLegality::canVectorizeWithIfConvert() {
  if (!Opts.enable_if_conversion) {
    reportVectorizationFailure("If-conversion is disabled",
                               "IfConversionDisabled", ORE, TheLoop);
    return false;
  }
 
  assert(TheLoop->getNumBlocks() > 1 && "Single block loops are vectorizable");
 
  // A list of pointers which are known to be dereferenceable within scope of
  // the loop body for each iteration of the loop which executes.  That is,
  // the memory pointed to can be dereferenced (with the access size implied by
  // the value's type) unconditionally within the loop header without
  // introducing a new fault.
  SmallPtrSet<Value *, 8> SafePointers;
 
  // Collect safe addresses.
  for (BasicBlock *BB : TheLoop->blocks()) {
    if (!blockNeedsPredication(BB)) {
      for (Instruction &I : *BB)
        if (auto *Ptr = getLoadStorePointerOperand(&I))
          SafePointers.insert(Ptr);
      continue;
    }
 
    // For a block which requires predication, a address may be safe to access
    // in the loop w/o predication if we can prove dereferenceability facts
    // sufficient to ensure it'll never fault within the loop. For the moment,
    // we restrict this to loads; stores are more complicated due to
    // concurrency restrictions.
    ScalarEvolution &SE = *PSE.getSE();
    SmallVector<const SCEVPredicate *, 4> Predicates;
    for (Instruction &I : *BB) {
      LoadInst *LI = dyn_cast<LoadInst>(&I);
 
      // Make sure we can execute all computations feeding into Ptr in the loop
      // w/o triggering UB and that none of the out-of-loop operands are poison.
      // We do not need to check if operations inside the loop can produce
      // poison due to flags (e.g. due to an inbounds GEP going out of bounds),
      // because flags will be dropped when executing them unconditionally.
      // TODO: Results could be improved by considering poison-propagation
      // properties of visited ops.
      auto CanSpeculatePointerOp = [this](Value *Ptr) {
        SmallVector<Value *> Worklist = {Ptr};
        SmallPtrSet<Value *, 4> Visited;
        while (!Worklist.empty()) {
          Value *CurrV = Worklist.pop_back_val();
          if (!Visited.insert(CurrV).second)
            continue;
 
          auto *CurrI = dyn_cast<Instruction>(CurrV);
          if (!CurrI || !TheLoop->contains(CurrI)) {
            BasicBlock *LoopPred = TheLoop->getLoopPredecessor();
            Instruction *CtxI = LoopPred ? LoopPred->getTerminator() : nullptr;
            assert((CtxI || ORE->allowExtraAnalysis(DEBUG_TYPE)) &&
                   "Loop with multiple predecessors should have been rejected "
                   "early.");
            // If operands from outside the loop may be poison then Ptr may also
            // be poison.
            if (!isGuaranteedNotToBePoison(CurrV, AC, CtxI, DT))
              return false;
            continue;
          }
 
          // A loaded value may be poison, independent of any flags.
          if (isa<LoadInst>(CurrI) && !isGuaranteedNotToBePoison(CurrV, AC))
            return false;
 
          // For other ops, assume poison can only be introduced via flags,
          // which can be dropped.
          if (!isa<PHINode>(CurrI) && !isSafeToSpeculativelyExecute(CurrI))
            return false;
          append_range(Worklist, CurrI->operands());
        }
        return true;
      };
      // Pass the Predicates pointer to isDereferenceableAndAlignedInLoop so
      // that it will consider loops that need guarding by SCEV checks. The
      // vectoriser will generate these checks if we decide to vectorise.
      if (LI && !LI->getType()->isVectorTy() && !mustSuppressSpeculation(*LI) &&
          CanSpeculatePointerOp(LI->getPointerOperand()) &&
          isDereferenceableAndAlignedInLoop(LI, TheLoop, SE, *DT, AC,
                                            &Predicates))
        SafePointers.insert(LI->getPointerOperand());
      Predicates.clear();
    }
  }
 
  // Collect the blocks that need predication.
  for (BasicBlock *BB : TheLoop->blocks()) {
    // We support only branches and switch statements as terminators inside the
    // loop.
    if (isa<SwitchInst>(BB->getTerminator())) {
      if (TheLoop->isLoopExiting(BB)) {
        reportVectorizationFailure("Loop contains an unsupported switch",
                                   "LoopContainsUnsupportedSwitch", ORE,
                                   TheLoop, BB->getTerminator());
        return false;
      }
    } else if (!isa<UncondBrInst, CondBrInst>(BB->getTerminator())) {
      reportVectorizationFailure("Loop contains an unsupported terminator",
                                 "LoopContainsUnsupportedTerminator", ORE,
                                 TheLoop, BB->getTerminator());
      return false;
    }
 
    // We must be able to predicate all blocks that need to be predicated.
    if (blockNeedsPredication(BB) &&
        !blockCanBePredicated(BB, SafePointers, ConditionallyExecutedOps)) {
      reportVectorizationFailure(
          "Control flow cannot be substituted for a select", "NoCFGForSelect",
          ORE, TheLoop, BB->getTerminator());
      return false;
    }
  }
 
  // We can if-convert this loop.
  return true;
}
 
// Helper function to canVectorizeLoopNestCFG.
bool LoopVectorizationLegality::canVectorizeLoopCFG(
    Loop *Lp, bool UseVPlanNativePath) const {
  assert((UseVPlanNativePath || Lp->isInnermost()) &&
         "VPlan-native path is not enabled.");
 
  // TODO: ORE should be improved to show more accurate information when an
  // outer loop can't be vectorized because a nested loop is not understood or
  // legal. Something like: "outer_loop_location: loop not vectorized:
  // (inner_loop_location) loop control flow is not understood by vectorizer".
 
  // Store the result and return it at the end instead of exiting early, in case
  // allowExtraAnalysis is used to report multiple reasons for not vectorizing.
  bool Result = true;
  bool DoExtraAnalysis = ORE->allowExtraAnalysis(DEBUG_TYPE);
 
  // We must have a loop in canonical form. Loops with indirectbr in them cannot
  // be canonicalized. The preheader must also be terminated by an unconditional
  // branch, which gets replaced when creating the vector loop.
  BasicBlock *Preheader = Lp->getLoopPreheader();
  if (!Preheader || !isa<UncondBrInst>(Preheader->getTerminator())) {
    reportVectorizationFailure(
        "Loop doesn't have a legal pre-header",
        "loop control flow is not understood by vectorizer", "CFGNotUnderstood",
        ORE, TheLoop);
    if (DoExtraAnalysis)
      Result = false;
    else
      return false;
  }
 
  // We must have a single backedge.
  if (Lp->getNumBackEdges() != 1) {
    reportVectorizationFailure(
        "The loop must have a single backedge",
        "loop control flow is not understood by vectorizer", "CFGNotUnderstood",
        ORE, TheLoop);
    if (DoExtraAnalysis)
      Result = false;
    else
      return false;
  }
 
  // The latch must be terminated by a branch.
  BasicBlock *Latch = Lp->getLoopLatch();
  if (Latch && !isa<UncondBrInst, CondBrInst>(Latch->getTerminator())) {
    reportVectorizationFailure(
        "The loop latch terminator is not a UncondBrInst/CondBrInst",
        "loop control flow is not understood by vectorizer", "CFGNotUnderstood",
        ORE, TheLoop);
    if (DoExtraAnalysis)
      Result = false;
    else
      return false;
  }
 
  return Result;
}
 
bool LoopVectorizationLegality::canVectorizeLoopNestCFG(
    Loop *Lp, bool UseVPlanNativePath) {
  // Store the result and return it at the end instead of exiting early, in case
  // allowExtraAnalysis is used to report multiple reasons for not vectorizing.
  bool Result = true;
  bool DoExtraAnalysis = ORE->allowExtraAnalysis(DEBUG_TYPE);
  if (!canVectorizeLoopCFG(Lp, UseVPlanNativePath)) {
    if (DoExtraAnalysis)
      Result = false;
    else
      return false;
  }
 
  // Recursively check whether the loop control flow of nested loops is
  // understood.
  for (Loop *SubLp : *Lp)
    if (!canVectorizeLoopNestCFG(SubLp, UseVPlanNativePath)) {
      if (DoExtraAnalysis)
        Result = false;
      else
        return false;
    }
 
  return Result;
}
 
/// Matches an exit condition formed by comparing a value loaded from memory
/// with another term. Binds the pointer, load, and the other comparison term.
static bool matchUncountableExitCondition(Value *Cond, Value *&Ptr,
                                          Instruction *&Load, Value *&Other) {
  return match(
      Cond, m_c_Cmp(m_Instruction(Load, m_Load(m_Value(Ptr))), m_Value(Other)));
}
 
/// Matches an exit condition formed by comparing the current value of an
/// affine add recurrence in the given loop with a stride of 1 against a
/// loop-invariant term.
static bool matchCountableExitCondition(Value *Cond, ScalarEvolution &SE,
                                        Loop *TheLoop) {
  using namespace llvm::SCEVPatternMatch;
  Value *IVUpdate, *Limit;
  return match(Cond, m_c_ICmp(m_Value(IVUpdate, m_Add(m_Value(), m_Value())),
                              m_Value(Limit))) &&
         TheLoop->isLoopInvariant(Limit) &&
         SCEVPatternMatch::match(SE.getSCEV(IVUpdate),
                                 m_scev_AffineAddRec(m_SCEV(), m_scev_One(),
                                                     m_SpecificLoop(TheLoop)));
}
 
/// Matches a combined exit condition consisting of an uncountable condition and
/// a countable condition, combined by an or.  Binds the pointer, load, the
/// second comparison term for the uncountable condition, and the comparison for
/// the countable condition.
static bool matchCombinedExitCondition(Value *Cond, Instruction *&CountableCond,
                                       Value *&Ptr, Instruction *&Load,
                                       Value *&Other, ScalarEvolution &SE,
                                       Loop *TheLoop) {
  Value *L, *R;
  if (!match(Cond, m_LogicalOr(m_Value(L), m_Value(R))))
    return false;
 
  if (matchCountableExitCondition(L, SE, TheLoop) &&
      matchUncountableExitCondition(R, Ptr, Load, Other)) {
    CountableCond = cast<Instruction>(L);
    return true;
  }
 
  if (matchCountableExitCondition(R, SE, TheLoop) &&
      matchUncountableExitCondition(L, Ptr, Load, Other)) {
    CountableCond = cast<Instruction>(R);
    return true;
  }
 
  return false;
}
 
Instruction *
LoopVectorizationLegality::findCountableComparisonInCombinedCondition(
    Value *Cond) const {
  Value *Ptr, *Other;
  Instruction *Load, *CountableCmp;
  if (matchCombinedExitCondition(Cond, CountableCmp, Ptr, Load, Other,
                                 *PSE.getSE(), TheLoop))
    return CountableCmp;
 
  return nullptr;
}
 
bool LoopVectorizationLegality::isVectorizableEarlyExitLoop() {
  BasicBlock *LatchBB = TheLoop->getLoopLatch();
  if (!LatchBB) {
    reportVectorizationFailure("Loop does not have a latch",
                               "Cannot vectorize early exit loop",
                               "NoLatchEarlyExit", ORE, TheLoop);
    return false;
  }
 
  if (!FixedOrderRecurrences.empty()) {
    reportVectorizationFailure(
        "Found fixed-order recurrences in early-exit loop",
        "Cannot vectorize early exit loop with fixed-order recurrences",
        "RecurrencesInEarlyExitLoop", ORE, TheLoop);
    return false;
  }
 
  SmallVector<BasicBlock *, 8> ExitingBlocks;
  TheLoop->getExitingBlocks(ExitingBlocks);
 
  // Keep a record of all the exiting blocks.
  SmallVector<const SCEVPredicate *, 4> Predicates;
  SmallVector<BasicBlock *> UncountableExitingBlocks;
  for (BasicBlock *BB : ExitingBlocks) {
    const SCEV *EC =
        PSE.getSE()->getPredicatedExitCount(TheLoop, BB, &Predicates);
    if (isa<SCEVCouldNotCompute>(EC)) {
      if (size(successors(BB)) != 2) {
        reportVectorizationFailure(
            "Early exiting block does not have exactly two successors",
            "Incorrect number of successors from early exiting block",
            "EarlyExitTooManySuccessors", ORE, TheLoop);
        return false;
      }
 
      UncountableExitingBlocks.push_back(BB);
    } else
      CountableExitingBlocks.push_back(BB);
  }
  // We can safely ignore the predicates here because when vectorizing the loop
  // the PredicatatedScalarEvolution class will keep track of all predicates
  // for each exiting block anyway. This happens when calling
  // PSE.getSymbolicMaxBackedgeTakenCount() below.
  Predicates.clear();
 
  if (UncountableExitingBlocks.empty()) {
    LLVM_DEBUG(dbgs() << "LV: Could not find any uncountable exits\n");
    return false;
  }
 
  // The latch block must have a countable exit.
  if (isa<SCEVCouldNotCompute>(PSE.getSE()->getPredicatedExitCount(
          TheLoop, LatchBB, &Predicates, ScalarEvolution::SymbolicMaximum))) {
    reportVectorizationFailure(
        "Cannot determine symbolic max exit count for latch block",
        "Cannot vectorize early exit loop",
        "UnknownLatchExitCountEarlyExitLoop", ORE, TheLoop);
    return false;
  }
 
  if (!is_contained(CountableExitingBlocks, LatchBB)) {
    // If not a separate counted exit in the latch, then check for a combined
    // countable and uncountable exit.
    auto *Br = dyn_cast<CondBrInst>(LatchBB->getTerminator());
    if (!Br ||
        !findCountableComparisonInCombinedCondition(Br->getCondition())) {
      reportVectorizationFailure(
          "Latch block does not have a countable exit condition",
          "NoCountableConditionInLatchBlock", ORE, TheLoop);
      return false;
    }
  }
 
  // Check to see if there are instructions that could potentially generate
  // exceptions or have side-effects.
  auto IsSafeOperation = [](Instruction *I) -> bool {
    switch (I->getOpcode()) {
    case Instruction::Load:
    case Instruction::Store:
    case Instruction::PHI:
    case Instruction::UncondBr:
    case Instruction::CondBr:
      // These are checked separately.
      return true;
    default:
      return isSafeToSpeculativelyExecute(I);
    }
  };
 
  bool HasSideEffects = false;
  for (auto *BB : TheLoop->blocks())
    for (auto &I : *BB) {
      if (isa<PseudoProbeInst>(I))
        continue;
      if (I.mayWriteToMemory()) {
        if (isa<StoreInst>(&I) && cast<StoreInst>(&I)->isSimple()) {
          HasSideEffects = true;
          continue;
        }
 
        // We don't support complex writes to memory.
        reportVectorizationFailure(
            "Complex writes to memory unsupported in early exit loops",
            "Cannot vectorize early exit loop with complex writes to memory",
            "WritesInEarlyExitLoop", ORE, TheLoop);
        return false;
      }
 
      if (!IsSafeOperation(&I)) {
        reportVectorizationFailure("Early exit loop contains operations that "
                                   "cannot be speculatively executed",
                                   "UnsafeOperationsEarlyExitLoop", ORE,
                                   TheLoop);
        return false;
      }
    }
 
  SmallVector<LoadInst *, 4> NonDerefLoads;
  // TODO: Handle loops that may fault.
  if (!HasSideEffects) {
    // Read-only loop.
    Predicates.clear();
    if (!isReadOnlyLoop(TheLoop, PSE.getSE(), DT, AC, NonDerefLoads,
                        &Predicates)) {
      reportVectorizationFailure(
          "Loop may fault", "Cannot vectorize non-read-only early exit loop",
          "NonReadOnlyEarlyExitLoop", ORE, TheLoop);
      return false;
    }
  } else {
    // Check all uncountable exiting blocks for movable loads.
    for (BasicBlock *ExitingBB : UncountableExitingBlocks) {
      if (!canUncountableExitConditionLoadBeMoved(ExitingBB))
        return false;
    }
  }
 
  // Check non-dereferenceable loads if any.
  for (LoadInst *LI : NonDerefLoads) {
    // Only support unit-stride access for now.
    int Stride = isConsecutivePtr(LI->getType(), LI->getPointerOperand());
    if (Stride != 1) {
      reportVectorizationFailure(
          "Loop contains potentially faulting strided load",
          "Cannot vectorize early exit loop with "
          "strided fault-only-first load",
          "EarlyExitLoopWithStridedFaultOnlyFirstLoad", ORE, TheLoop);
      return false;
    }
  }
 
  // We're only handling combined exit conditions via masking at present, which
  // is used for loops with side effects.
  // TODO: Support readonly loops with combined exit conditions.
  // TODO: Decouple style from the presence of side effects.
  if (!llvm::is_contained(CountableExitingBlocks, LatchBB) && !HasSideEffects)
    return false;
 
  [[maybe_unused]] const SCEV *SymbolicMaxBTC =
      PSE.getSymbolicMaxBackedgeTakenCount();
  // Since we have an exact exit count for the latch and the early exit
  // dominates the latch, then this should guarantee a computed SCEV value.
  assert(!isa<SCEVCouldNotCompute>(SymbolicMaxBTC) &&
         "Failed to get symbolic expression for backedge taken count");
  LLVM_DEBUG(dbgs() << "LV: Found an early exit loop with symbolic max "
                       "backedge taken count: "
                    << *SymbolicMaxBTC << '\n');
  UncountableExitType = HasSideEffects ? UncountableExitTrait::ReadWrite
                                       : UncountableExitTrait::ReadOnly;
  return true;
}
 
bool LoopVectorizationLegality::canUncountableExitConditionLoadBeMoved(
    BasicBlock *ExitingBlock) {
  // Try to find a load in the critical path for the uncountable exit condition.
  // This is currently matching about the simplest form we can, expecting
  // only one in-loop load, the result of which is directly compared against
  // a loop-invariant value.
  auto *Br = cast<CondBrInst>(ExitingBlock->getTerminator());
 
  using namespace llvm::PatternMatch;
  Value *Ptr, *Other;
  Instruction *L, *CountableCond;
  // We want to match either an uncounted condition (loaded value compared
  // against a loop invariant value) or the combination (via logical or) of
  // an uncounted condition with a counted condition (integer comparison of
  // an induction variable for which we can identify an add recurrence within
  // this loop).
  if (!matchUncountableExitCondition(Br->getCondition(), Ptr, L, Other) &&
      !matchCombinedExitCondition(Br->getCondition(), CountableCond, Ptr, L,
                                  Other, *PSE.getSE(), TheLoop)) {
    reportVectorizationFailure(
        "Early exit loop with store but no supported condition load",
        "NoConditionLoadForEarlyExitLoop", ORE, TheLoop);
    return false;
  }
 
  // Bail if the uncountable exit load is compared against a non-invariant
  // value.
  // TODO: Remove this restriction.
  if (!TheLoop->isLoopInvariant(Other)) {
    reportVectorizationFailure(
        "Early exit loop with store but no supported condition load",
        "NoConditionLoadForEarlyExitLoop", ORE, TheLoop);
    return false;
  }
 
  // Make sure that the load address is not loop invariant; we want an
  // address calculation that we can rotate to the next vector iteration.
  const auto *AR = dyn_cast<SCEVAddRecExpr>(PSE.getSE()->getSCEV(Ptr));
  if (!AR || AR->getLoop() != TheLoop || !AR->isAffine()) {
    reportVectorizationFailure(
        "Uncountable exit condition depends on load with an address that is "
        "not an add recurrence in the loop",
        "EarlyExitLoadInvariantAddress", ORE, TheLoop);
    return false;
  }
 
  ICFLoopSafetyInfo SafetyInfo(TheLoop);
  LoadInst *Load = cast<LoadInst>(L);
  // We need to know that load will be executed before we can hoist a
  // copy out to run just before the first iteration.
  if (!SafetyInfo.isGuaranteedToExecute(*Load, DT)) {
    reportVectorizationFailure(
        "Load for uncountable exit not guaranteed to execute",
        "ConditionalUncountableExitLoad", ORE, TheLoop);
    return false;
  }
 
  // Prohibit any potential aliasing with any instruction in the loop which
  // might store to memory.
  // FIXME: Relax this constraint where possible.
  for (auto *BB : TheLoop->blocks()) {
    for (auto &I : *BB) {
      if (&I == Load)
        continue;
 
      // Pseudo-probes are placeholders with no real memory
      // access, so they cannot alias the exit condition load and do not need
      // to be masked.
      if (isa<PseudoProbeInst>(I))
        continue;
 
      if (I.mayReadOrWriteMemory()) {
        // We need to mask all other memory ops.
        ConditionallyExecutedOps.insert(&I);
        if (isa<LoadInst>(&I))
          continue;
        if (auto *SI = dyn_cast<StoreInst>(&I)) {
          AliasResult AR = AA->alias(Ptr, SI->getPointerOperand());
          if (AR == AliasResult::NoAlias)
            continue;
        }
 
        reportVectorizationFailure(
            "Cannot determine whether critical uncountable exit load address "
            "does not alias with a memory write",
            "CantVectorizeAliasWithCriticalUncountableExitLoad", ORE, TheLoop);
        return false;
      }
    }
  }
 
  return true;
}
 
bool LoopVectorizationLegality::canVectorize(bool UseVPlanNativePath) {
  // Store the result and return it at the end instead of exiting early, in case
  // allowExtraAnalysis is used to report multiple reasons for not vectorizing.
  bool Result = true;
 
  bool DoExtraAnalysis = ORE->allowExtraAnalysis(DEBUG_TYPE);
  // Check whether the loop-related control flow in the loop nest is expected by
  // vectorizer.
  if (!canVectorizeLoopNestCFG(TheLoop, UseVPlanNativePath)) {
    if (DoExtraAnalysis) {
      LLVM_DEBUG(dbgs() << "LV: legality check failed: loop nest");
      Result = false;
    } else {
      return false;
    }
  }
 
  // We need to have a loop header.
  LLVM_DEBUG(dbgs() << "LV: Found a loop: " << TheLoop->getHeader()->getName()
                    << '\n');
 
  // Specific checks for outer loops. We skip the remaining legal checks at this
  // point because they don't support outer loops.
  if (!TheLoop->isInnermost()) {
    assert(UseVPlanNativePath && "VPlan-native path is not enabled.");
 
    if (!canVectorizeOuterLoop()) {
      reportVectorizationFailure("Unsupported outer loop",
                                 "UnsupportedOuterLoop", ORE, TheLoop);
      // TODO: Implement DoExtraAnalysis when subsequent legal checks support
      // outer loops.
      return false;
    }
 
    LLVM_DEBUG(dbgs() << "LV: We can vectorize this outer loop!\n");
    return Result;
  }
 
  assert(TheLoop->isInnermost() && "Inner loop expected.");
  // Check if we can if-convert non-single-bb loops.
  unsigned NumBlocks = TheLoop->getNumBlocks();
  if (NumBlocks != 1 && !canVectorizeWithIfConvert()) {
    LLVM_DEBUG(dbgs() << "LV: Can't if-convert the loop.\n");
    if (DoExtraAnalysis)
      Result = false;
    else
      return false;
  }
 
  // Check if we can vectorize the instructions and CFG in this loop.
  if (!canVectorizeInstrs()) {
    LLVM_DEBUG(dbgs() << "LV: Can't vectorize the instructions or CFG\n");
    if (DoExtraAnalysis)
      Result = false;
    else
      return false;
  }
 
  if (isa<SCEVCouldNotCompute>(PSE.getBackedgeTakenCount()) &&
      !isVectorizableEarlyExitLoop()) {
    assert(UncountableExitType == UncountableExitTrait::None &&
           "Must be false without vectorizable early-exit loop");
    if (TheLoop->getExitingBlock())
      reportVectorizationFailure("Cannot vectorize uncountable loop",
                                 "UnsupportedUncountableLoop", ORE, TheLoop);
    if (DoExtraAnalysis)
      Result = false;
    else
      return false;
  }
 
  // Go over each instruction and look at memory deps.
  if (!canVectorizeMemory()) {
    LLVM_DEBUG(dbgs() << "LV: Can't vectorize due to memory conflicts\n");
    if (DoExtraAnalysis)
      Result = false;
    else
      return false;
  }
 
  // TODO: Remove this restriction, should be straightforward to support.
  if (UncountableExitType != UncountableExitTrait::None &&
      !LAI->getStoresToInvariantAddresses().empty()) {
    LLVM_DEBUG(dbgs() << "LV: Cannot vectorize early exit loops with stores to "
                         "loop-invariant addresses\n");
    reportVectorizationFailure("Cannot vectorize early exit loops with stores "
                               "to loop-invariant addresses",
                               "LoopInvariantStoresInEELoop", ORE, TheLoop);
    return false;
  }
 
  if (Result) {
    LLVM_DEBUG(dbgs() << "LV: Loop passed LoopVectorizationLegality checks"
                      << (LAI->getRuntimePointerChecking()->Need
                              ? " (with a runtime bound check)"
                              : "")
                      << "!\n");
  }
 
  // Okay! We've done all the tests. If any have failed, return false. Otherwise
  // we can vectorize, and at this point we don't have any other mem analysis
  // which may limit our maximum vectorization factor, so just return true with
  // no restrictions.
  return Result;
}
 
bool LoopVectorizationLegality::canFoldTailByMasking() const {
  // The only loops we can vectorize without a scalar epilogue, are loops with
  // a bottom-test and a single exiting block. We'd have to handle the fact
  // that not every instruction executes on the last iteration.  This will
  // require a lane mask which varies through the vector loop body.  (TODO)
  if (TheLoop->getExitingBlock() != TheLoop->getLoopLatch()) {
    LLVM_DEBUG(
        dbgs()
        << "LV: Cannot fold tail by masking. Requires a singe latch exit\n");
    return false;
  }
 
  // TODO: Support tail folding with uncountable exits.
  if (hasUncountableEarlyExit()) {
    LLVM_DEBUG(dbgs() << "LV: Cannot tail fold by masking. Loop contains an "
                         "uncountable early exit.\n");
    return false;
  }
 
  LLVM_DEBUG(dbgs() << "LV: checking if tail can be folded by masking.\n");
 
  // The list of pointers that we can safely read and write to remains empty.
  SmallPtrSet<Value *, 8> SafePointers;
 
  // Check all blocks for predication, including those that ordinarily do not
  // need predication such as the header block.
  SmallPtrSet<const Instruction *, 8> TmpMaskedOp;
  for (BasicBlock *BB : TheLoop->blocks()) {
    if (!blockCanBePredicated(BB, SafePointers, TmpMaskedOp)) {
      LLVM_DEBUG(dbgs() << "LV: Cannot fold tail by masking.\n");
      return false;
    }
  }
 
  LLVM_DEBUG(dbgs() << "LV: can fold tail by masking.\n");
 
  return true;
}
 
void LoopVectorizationLegality::prepareToFoldTailByMasking() {
  // The list of pointers that we can safely read and write to remains empty.
  SmallPtrSet<Value *, 8> SafePointers;
 
  // Mark all blocks for predication, including those that ordinarily do not
  // need predication such as the header block, and collect instructions needing
  // predication in TailFoldedMaskedOp.
  for (BasicBlock *BB : TheLoop->blocks()) {
    [[maybe_unused]] bool R =
        blockCanBePredicated(BB, SafePointers, TailFoldedMaskedOp);
    assert(R && "Must be able to predicate block when tail-folding.");
  }
}
 
} // namespace llvm